Can anyone tell me why no sound is comming out of my cdx-m630 receiver i plugged in all the wires at the right spot but no chance???
P.S. A funny thing that i notice is that the some of the wires in the diagram for the cd deck are not in the same spot as the ones i see, for example my diagram says that the white wire that is the LF+ should be in pin #1 but mine is in #4 the only good ones that are in the good place are red,black and yellow.
Either rewire the connector by pushing the pins out or just go by the position instead of the color, here is a chart.If the red, black and yellow are correct you should be able to figure out the rest
Pin Number Wire Color Function 1 White Left Front Positive 2 Green Left Rear Positive 3 Violet Right Rear Positive 4 Grey Right Front Positive 5 Blue/White Amplifier Remote 6 Blue Antenna Remote 7 Red Accessory 12 Volts 8 Black Ground 9 White/Black Left Front Negative 10 Green/Black Left Rear Negative 11 Violet/Black Right Rear Negative 12 Grey/Black Right Front Negative 13 Sky Blue Telephone Mute 14 Orange/White Illumination 15 Not Used Not Used 16 Yellow Constant 12 Volts