Silver Member
Username: James_g TN
Post Number: 325 Registered: Jul-05
Posted on
Tuesday, October 18, 2005 - 06:12 GMT Any tips on seperating this wire? I'm working with the Knu Konceptz 12 GA Karma Kable. This stuff is a real PITA! I'm using a razor blade, which I just inserted into my finger, and this is very tedious. How do you folks go about removing the outer shielding on these wires?
Silver Member
Username: Fandim Reno,
Nevada
United State...
Post Number: 334 Registered: Jun-05
Posted on
Tuesday, October 18, 2005 - 07:16 GMT James G, try some tin-snips. That's what I used and it worked very well. (with the exact same speaker wire). And yeah...it's a pain in the butt alright.. But it's neat lookin, heh hhe.
Bronze Member
Username: Need4bass We-Be-Swamps,
Louisiana
Post Number: 75 Registered: Oct-05
Posted on
Tuesday, October 18, 2005 - 15:21 GMT I used an Xact-O knife. Just set the blade so it barely protrudes, lay the cable on a flat hard surface and slowly slice down the middle.
Silver Member
Username: Xkawn Post Number: 203 Registered: Jul-05
Posted on
Wednesday, October 19, 2005 - 02:30 GMT i used a pair of scissors. worked alright, but yes, pain in the rear. same wire here also.
Bronze Member
Username: Rideredder Cornell,
IL
USA
Post Number: 64 Registered: Sep-05
Posted on
Wednesday, October 19, 2005 - 07:47 GMT Just bend, slice, turn, bend, slice, turn, until you make it all the way around.
Bronze Member
Username: Jake110011 Jackson,
Michigan
Post Number: 39 Registered: Oct-05
Posted on
Friday, October 21, 2005 - 01:19 GMT YOU ALL DO IT THE HARD WAY. . . .CRIMPERS WORK THE BEST!
Gold Member
Username: Mikechec9 Http://www.cardomain.c...
Post Number: 1308 Registered: May-05
Posted on
Friday, October 21, 2005 - 02:29 GMT i used my wire cutters, and my bare hands. an extreme pita indeed. not worth the inconvenience. i decided to just go with some nice 8awg and charge the loss on the twisted pair to the game.