|
Silver Member Username: Killer44Ontario Canada Post Number: 206 Registered: Dec-04 | im building a ported box for a ALUM12Q, and the audiobahn site says 2.5 for air space and 4x7.75 now would i jsut build a box w/ 2.5 cu ft. jsut like a sealed enclosure and then cut out a port to the remcomended size(also should it be a slot port or circle(pvc) ) thanx in advance... |
|
Silver Member Username: Yamahabanshee1Paulding, Ohio USA Post Number: 196 Registered: Jul-04 | well on audiobahns site it should say what cuft to make the ported box cuz the sealed box is smaller so it will need to probally be around 3cuft I like circle ports personally! use this site it will help! www.bcae1.com/spboxnew2.htm that has all the caculations and all that good stuff |
|
Silver Member Username: Killer44Ontario Canada Post Number: 207 Registered: Dec-04 | thanx but i didnt need to know the size i got all that aready, i jsut need to know if that how i would go buy building the ported enclosure(see 1st post) thanx....and aobut the slot port or circle(if that whataudiobahn means by 4x7.75) |
|
Bronze Member Username: Nocc1nLouisa, VA US Post Number: 50 Registered: May-05 | use audiobahns ported specs like it has on their site for the sub. You can buy some thing for the port online. Yeah when it says 4x7.75 It means a port 4 inches in diameter and 7.75 inches deep. |