A GOOOD 4ohm and 1ohm stable 1600watt AMP!
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 183 Registered: Sep-05 | 400 or 500RMS about 220 dollers @4ohms and also 1ohm stable?? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1191 Registered: Jul-05 | for what sub(s) ? |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 184 Registered: Sep-05 | SUBS! 2 12" 124D's Lanzars 500RMS / SUB DVC4ohm Also i have a Visonik 12" 1250RMS sub thats 2ohm stable. Im not shore think this one is a DV2 |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 188 Registered: Sep-05 | Also need a box for the Visonik sub. |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 189 Registered: Sep-05 | JUst a good 1000RMS amp thats 2ohm 1ohm and 4ohm stable and bridge able at 2 and 4ohms if thats possible. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1193 Registered: Jul-05 | If u connect those lanzars @ 4ohms then an amp for that config amp will be VERY EXPENSIVE - connect to 1ohm & use a Hifonics http://sonicelectronix.com/item_360.html if your Vis sub is 2ohm dvc then then amp can work on it too - by itself & not all 3 subs together that is . |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 191 Registered: Sep-05 | BUt if i need it 2 be for 2 channels then:S? Would the 500RMS break up inot 250 EACH:S |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 193 Registered: Sep-05 | OH SNAP these are the VISONIK SPECS 15" 1500W Rms 3000W Max 180oz Double Stacked Magnet Sensitivity: 87.4 dB @ 1w/1m Mounting Depth: 7" Vented Box: 5.75 Cu. Ft. Port Size: 4- 4" D x 19.5" L Sealed Box: 2.0 -- 3.0 Cu. Ft. |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 197 Registered: Sep-05 | Here we go http://www.rhinotronics.com/index.cfm/act/Catalog.cfm/catalogid/885/Featured/nul l/browse/wholesale/MenuGroup/Home/desc/Visonik%20V815D2%2015%22%203000%20Watts%2 0Dual%202%20Ohm%20Compition%20Subwoofer%20Speaker.htm Thats the ONE. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1195 Registered: Jul-05 | I dealt with the Vis sub in your other thread so lets deal with those Lanzars in this thread Why do u want it to be a 2 chan amp instead of the preferred mono ?????? |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 198 Registered: Sep-05 | Wow and i got thsi for free lol. Now i neeed somthing at 2ohm that pushes about that much so i could wire my lanazar to 2ohm. |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 199 Registered: Sep-05 | I want one amp i could use for BOTH. so a 1000RMS amp MONO channel stable at 1 2 and 4 ohms. Lanzars are 4ohm stable and Visnok is 2ohm but i might run both at 1ohm if i switch them and stuff. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1197 Registered: Jul-05 | post a link 2 those subs |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 202 Registered: Sep-05 | http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=13737 |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 203 Registered: Sep-05 | Okay so i have these 2000wat mAX lanzars alright and i havea 3000Wat max Visnoik amp. Look this is what is going on i need an opinon really. I have 15" SUB pushes 1500RMS watts and i havea 2 12s that push 1000RMS watts. Now what should i do bro tell me im just lost rihgt now. Okay i get that a Mono channel amp would be nice and that i need an amp that is 1ohm stable for shroe because i could use both my lanzars and visnoik at 1ohm for more power so rest if your bro. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1199 Registered: Jul-05 | I figured u want a single powerful enough amp so u can experiment & switch out box set-ups to hear which will sound better . http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14805 RMS @ 1-Ohm: 1 x 2000-Watts so if u run those 2 Lanzar subs @ 1ohm that amp will be working @ roughly 1/2 strenght - keep your volume knob down . if u run that 1 15" Vis thats 1500wrms @ 1 ohm Hif amps are est to give out 70% of rated power 2000wrms = 1400wrms which is sufficient in both applications . So no need to worry about power . I have a feeling that your 1500wrms Vis will beat out 2 12s 500x2 wrms subs . |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 205 Registered: Sep-05 | Then if all goes well i might sell the BOxed BandPass + 2 12" Lanzars and then maybe even the Visonik and get somthing better. |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 206 Registered: Sep-05 | Then if all goes well i might sell the BOxed BandPass + 2 12" Lanzars and then maybe even the Visonik and get somthing better. |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 207 Registered: Sep-05 | WHat box do you reccomend for the Visnoik 15" :S? How many ports what size ports.... |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1200 Registered: Jul-05 | the amp is still pretty decent for the $ - search around & its cheaper . I'd say get the amp ,play around with it for a few days & if u don't like the subs get rid of them & buy a pair of Alpine type R or X ....... |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1201 Registered: Jul-05 | according to your link 15 Vis sub specs are # Vented Box: 5.75 Cu. Ft.Round Port # Diameter: (4) 4" # Square Port Area: 50.25 Sq/InPort # Length: 19.5" # Sealed Box: 2.0 - 3.0 Cu. Ft so thats the kinda box that u would looking out for , but make sure whatever box u choose its made out of @ least 3/4 MDF ...... hmmmmm - i just crossed the 1200 posts mark .... |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 208 Registered: Sep-05 | Well first im going to set my 2 subs at 2ohm the lanzars. Neg Neg and Pos Pos then one Neg to Pos in one channel and then One Neg and one Pos in another channel to get 500RMs from my current amp. |
|
Silver Member Username: TdbdadrummerPost Number: 417 Registered: Aug-05 | I got it. Buy the Sony XPLOD 5000W @ .25 ohms amp. That thing...will BUMP! It will be like MY HUMPS HY HUMPS HY HUMPS! |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 209 Registered: Sep-05 | WOOOOOOW I turned my subs 2 2OHMS and NOW MY TRUNK RATTLES LIKE FKING CRZZZYYYY OMGG my dad wont let me go over 20/40  how do i stop trunk rattle? |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 212 Registered: Sep-05 | http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=12657 Somthing like that?? I just need a little bit its for the trunk of a Civic i doubt ill need all that would i? |
|
Ranza Unregistered guest | Hi to all,my name is Ranza, and new hear.I just want to know is i did the right thing when i fit: 1 alpine cda 9851 radio cd player, 1 gladiator 1200w 4chanel amp to push 2x800w pioneer subs on separate boxs at the back, 1 blaster 1600w 4chanel amp to push 1 set of starsound 300w split system to front,and set of 160w two ways for the midle.All this fited on toyota vx land cruiser.Pls let me know and place comments...Thanks to all. |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 214 Registered: Sep-05 | bro your going to have to start a new thread you get more respoence its not like other forums where u cant make another thread for no reason. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics