|
New member Username: Jma321Post Number: 1 Registered: Oct-05 | Hello im new here and been reading some posts but hard to find something exact like mine. I have 3 x 10" eclipse aluminum i believe they are 4 ohm dual voice coil each. I would like to know what amp i could run that would really power them. I currently have a power acoustik 2400 the older one that was chrome with clear plexiglass on top. It doesn't seem to really power them well enough. Thank you for any recomendations and if you need more info let me know. |
|
New member Username: Jma321Post Number: 2 Registered: Oct-05 | No advice? I really could use a recomendation? Thanks again. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1020 Registered: Jul-05 | go to here & post back the exact model then here to see your wiring options http://www.the12volt.com/caraudio/woofer_configurations.asp & then post back |
|
New member Username: Jma321Post Number: 3 Registered: Oct-05 | I believe they are the SW7104DVCT4 from what remember ill have to double check but also could be SW7104DVCT2. Also i believe they are wired series/parallel. Im sorry i don't have all the detail and i realize now i should have gotten that first. They are deffinetly one of those models though and the way they are wired can always be moddified to match the amp. Thank for any advice you could offer anyone. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1025 Registered: Jul-05 | Well no matter the configuration this amp will b perfect 4 your needs cause those 3 subs require 1200wrms so this'll do nice nicely cause it does 1200wrms @ 1-4ohms ....... http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14132 |
|
Silver Member Username: Riebread77Post Number: 668 Registered: Jun-05 | good solid amp and underrated too... |
|
New member Username: Jma321Post Number: 4 Registered: Oct-05 | I will look into it today. Thanks for the fast reply. |