Which amp?
|
whichamp Unregistered guest | I'm getting 2 Alpine SWR-1222D and was wondering if the MRD-M1005 would be under powering them or if i should go with a different amp (I want it to be loud ut with some SQ) |
|
Silver Member Username: RovinTrinidad & T... Post Number: 940 Registered: Jul-05 | those model of subs wired will = 2ohms load subs rated @ 500wrms each that amp would give 700wrms each - can work but if was me i'd prefer get 2 this is really good & will rock those subs pretty hard ....... |
|
Anonymous | thanbks rovin, i was actually considering getting the 4 ohm. what's the advantage over the 2 ohm? i dont really understand the difference in ohms |
|
Silver Member Username: RovinTrinidad & T... Post Number: 966 Registered: Jul-05 | Pretty much it all depends on your amp . if the lowest ohms your amp can do is 2ohms then if using 2 subs u buy the DVC 2ohms version . if the lowest ohms your amp can do is 1ohm then if using 2 subs u buy the DVC 4ohms version . pretty simple if u follow whats said on this site http://www.the12volt.com/caraudio/woofer_configurations.asp Don't be ashamed to show your name ,nothing's wrong with not knowing & some other time u might want 2 talk 2 me again & i may not recall the scenario .....  |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics