|
New member Username: Jamesb14Belleville, ON Canada Post Number: 1 Registered: Sep-05 | I need to get a good amp thatll power these good. I was gonna get a 800w 2 channel Kenwood amp but now im not sure as to get a mono amp or a 2 channel. So which would be the best to power these? |
|
New member Username: Jamesb14Belleville, ON Canada Post Number: 2 Registered: Sep-05 | o ya i forgot the subs are 350w rms and 600w peak and has a 4 layer 2 inch voice coil |
|
Bronze Member Username: Robert_dMIA, FL USA Post Number: 73 Registered: Sep-05 | get a mono class d amp ... if your lookin in the price of kenwood get hifonics http://cgi.ebay.com/NEW-05-Hifonics-TX1005D-1000-watts-AMP-ONLY-165_W0QQitemZ580 9960627QQcategoryZ18797QQssPageNameZWDVWQQrdZ1QQcmdZViewItem wire it to 2 ohm which will give u 700 rms |
|
New member Username: Jamesb14Belleville, ON Canada Post Number: 3 Registered: Sep-05 | im lookin to spend bout 400 bux |
|
Silver Member Username: RovinTrinidad & T... Post Number: 655 Registered: Jul-05 | which 1 of these u got ? http://sonicelectronix.com/viewcat.php?show_thumbnails=1&show_description=1&id=4 1&car_only=&page=1&manufacturer=29&new_page=1 post back a link to the right 1 |
|
New member Username: Jamesb14Belleville, ON Canada Post Number: 5 Registered: Sep-05 | i got this one... http://sonicelectronix.com/item_2405.html |
|
Silver Member Username: RovinTrinidad & T... Post Number: 657 Registered: Jul-05 | Normally a mono amp is rec for subs but since both your subs = 700wrms & the majority of amps are either 600 & 1000wrms which both too low & too high (unless u turn gains down ) this should work http://sonicelectronix.com/item_718.html RMS Power (2 ohms) 400 watts x 2 chan. |
|
New member Username: Jamesb14Belleville, ON Canada Post Number: 6 Registered: Sep-05 | thanks |