Hi all. Im using BassBox 6 Pro to build an mdf enclosure for 1230w and Im having a hard time understanding the Vas and dimensions of the box.
I enter the dimensions of the sub in the program and it calculates Vas automatically - 128.8 liters, while on the sub specs it says 75.8 liters. These two values are waaaay off, so I dont know which one to use?
Also, if someone has a bit of free time on their hands, Im trying to build a two-angle wedge (half square) and I need dimensions.
Again, sub is 12' Infinity Reference 1230W.
Thanks in advance!
Booba
Unregistered guest
Posted on
Bump. I have two of those subs and Im doing separate sealed enclosures for each. I did all the measurments and it comes up to 54 liters max (each enclosure), that can fit in my car. 54 liters = 1.9 cu ft
BassBox calculated Qtc = 0.763 (which is pretty good I assume), but thats with Vas = 75.8 liters.
So the question remains, what is the Vas for 12' Infinity 1230W? I think the data in BassBox (Vas=128.8 liters) is incorrect. Is it possible?
Booba
Unregistered guest
Posted on
Anyone?
RFINF
Unregistered guest
Posted on
Booba,
I have that same sub in a sealed enclosure, but just upgraded to a ported Well worth the 160 buxx. Anyways, back to your question. If you go to Infinity's Website and go under product support, e-mail infinity and they will respond to your e-mail within a few hours or so if you can't find out your answer. I have e-mailed them a few times reguarding my box and they responded very VERY quickly. Just give them both deminisons and they will tell you which one will work best!
Well worth the 160 buxx. Anyways, back to your question. If you go to Infinity's Website and go under product support, e-mail infinity and they will respond to your e-mail within a few hours or so if you can't find out your answer. I have e-mailed them a few times reguarding my box and they responded very VERY quickly. Just give them both deminisons and they will tell you which one will work best!