|
New member Username: KwanchuPost Number: 1 Registered: Jul-05 | i decided to buy 2 kicker cvr10's.. http://www.circuitcity.com/ssm/Kicker-10-Subwoofer-CVR10-/sem/rpsm/oid/117480/rp em/ccd/productDetail.do don't worry i won't buy from circuit city just a reference... basically they say 600watt max power.. i'm ignorant when it comes to car audio... so can someone suggest a kicker amp if i'm going to buy two of those 10" kickers? thanks |
|
Silver Member Username: Iowahawks19Post Number: 328 Registered: Jun-05 | jbl 600.1/kicker bx600.1/MTX 801d(800 watts but you could make it work) |
|
New member Username: KwanchuPost Number: 2 Registered: Jul-05 | so let me try to understand... the kicker bx600.1 is a 600 watt peak power amplifier? so i only need to match the wattage with each sub? what about ohms and that stuff? what do i have to use to make sure it's working correctly? |
|
Silver Member Username: JaackdethUnited States Post Number: 292 Registered: Sep-04 | You have to decide if you want dual 2 or 4 ohm set-up on the subs, and then go from there with the amp! Here is a site to show you the different ways to wire subs to get what ohms your looking for! http://www.jlaudio.com/tutorials/wiring/index.html |
|
New member Username: KwanchuPost Number: 3 Registered: Jul-05 | thanks a lot! |
|
Silver Member Username: ThrushdtdNew York Post Number: 268 Registered: May-05 | get dual 2 ohm, wire them to a 2 ohm load and get am amp that pushed 600rms@2ohm |