|
New member Username: Andrew4540Post Number: 6 Registered: Jun-05 | hey, i recently purchesed 2 type-r's (SWR-1242D) and an orion 600D amp. Could someone please draw me a diagram of how i would wire this to get the most out of it. I was thinking of going at 1 ohm, but i dont know how i would wire the subs together, and then to the amp...so if someone could maybe draw me a picture? lol |
|
Bronze Member Username: TboltCollipark, GA Post Number: 89 Registered: Dec-04 | http://www.jlaudio.com/tutorials/wiring/index.html#2dvcpp |
|
Bronze Member Username: Jb502Omaha, NE Post Number: 56 Registered: Jun-05 | dude, your subs come with that info in the box. I just bought the same ones except mine are 2 ohm not 4. the info is in the box, you just have to read it |
|
New member Username: Andrew4540Post Number: 7 Registered: Jun-05 | well...the subs are in transit. they should be here tomarrow. But i do have the manual off of a SWR-1241D, and i did not see a diagram at 1 ohm, and i figured the new one would be similar... |
|
Bronze Member Username: TboltCollipark, GA Post Number: 92 Registered: Dec-04 | 2 DVC drivers with Voice Coils in Parallel / Parallel Connecting the voice coils of each driver in parallel (+ to +, - to -) and the drivers themselves in parallel (+ to +, etc.) will result in the following impedances: Dual-6 Ohm Subwoofers: 1.5 Ohms You are here-->Dual-4 Ohm Subwoofers: 1 Ohm Dual-2 Ohm Subwoofers: 0.5 Ohm |
|
New member Username: Andrew4540Post Number: 8 Registered: Jun-05 | ok thanks, also..i have to build a box for these subs. i just baught a sheet of 3/4" MDF, and i intend to start the box tomarrow. My question is, do i need 1 or 2 terminal cups in the box? |
|
Bronze Member Username: TboltCollipark, GA Post Number: 93 Registered: Dec-04 | Just wire the subs in the box, and put positive and negative wires on 1 terminal |
|
Bronze Member Username: Jb502Omaha, NE Post Number: 59 Registered: Jun-05 | andrew check out this box, it is mine http://www.studioonline.com/playclip.asp?iDigitalMediaID=479755&tiEncodingStatus =1&LangID=1&crypt=68C1D53243F9DF13&iMediaTypeID=1 |
|
Bronze Member Username: Jb502Omaha, NE Post Number: 60 Registered: Jun-05 | sorry this one http://www.studioonline.com/playclip.asp?iDigitalMediaID=479755&tiEncodingStatus =1&LangID=1&crypt=68C1D53243F9DF13&iMediaTypeID=1 |
|
New member Username: Andrew4540Post Number: 9 Registered: Jun-05 | yea...its nice..but you spent 750 on it....thats allittle out of my budget.. |