Trevor I need your box plans for your abc box

 

Gold Member
Username: Insearchofbass

Post Number: 3180
Registered: Jun-04
I can predict for sure now where its going to hit best
 

Gold Member
Username: Insearchofbass

Post Number: 3181
Registered: Jun-04
nevermind i remembered it....your best hit wont change like i thought it would 40 hz should still be it
 

Silver Member
Username: Tdeaton1021

Near Tampa, Florida USA

Post Number: 712
Registered: Sep-04
alrght thanks sean, do you sitll want the plans?.... sorry i have been busy...
 

Gold Member
Username: Insearchofbass

Post Number: 3204
Registered: Jun-04
yeah actually i do for future refrence so I can build it again if I have to
 

Gold Member
Username: Insearchofbass

Post Number: 3205
Registered: Jun-04
is that thing in the process of being built? I cant wait to hear what you have to say when it is.
 

Silver Member
Username: Tdeaton1021

Near Tampa, Florida USA

Post Number: 713
Registered: Sep-04
umm, sorta lol.... its going to be atleast a moth... im going to the keys in a day for 10 days and then aruba for 10 days....
 

Silver Member
Username: Tdeaton1021

Near Tampa, Florida USA

Post Number: 714
Registered: Sep-04
his car=48wide 21 high 26.5 deep

4.66662 cf. first chamber ported at 20.0954 hz with 4 two inch id pvc ports 16.5 inches deep .15 port volocity at 800 rms
2.33331 cf. second chamber ported at 28.419 hz with 4 two inch id pvc ports 16.5 inches deep .11 port volocity at 800 rms
space taken up per port .046142578125 cf. (.1845703125 cf. for each front chamber) ( .0928515625 cf. for each interior chamber with the ports evenly spaced between the two chambers)
.5537109375 cf. space needed in box size over the 7.00 cf target to account for all port displacements
.277421875 is cf taken up in chamber 1 and 2
4.944041875 gross chamber 1
2.610731875 gross chamber 2

24.00 wide by 15.5 high by 23 deep=4.9513888 cf this is the demensions of chamber 1 internal you must also add a .75 mdf wall dividing chamber 1 and 2 (so account for that) and place each 2 inch port one over the other height wise evenly spaced length wise between the two chambers this is for the interior ports
12.6875(11/16) wide by 15.5 high by 23 deep=2.61753110532407 cf

only thing i need is the displacement for the subwoofer and ill add that into chamber 1 and were done
these demensions are internal so add 1.5 inches to length width and height because well be using .75 mdf


if i charted this box by theory right you should hit from to 20 hz to 55 hz after that you prob wont notice much except by cabin gain

youll do four 2 inch ports on the front of each chamber 16.5 inches deep and four 2 inch ports internally as instructed above

sean
Gold Member
Username: Insearchofbass

Post Number: 2649
Registered: Jun-04
Posted on Friday, June 10, 2005 - 04:15 pm:


sorry i realized the chamber measurements werent clear so here you go
chamber 1.... 24.00 wide by 15.5 high by 23 deep=4.9513888 cf

chamber 2.... 12.6875(11/16) wide by 15.5 high by 23 deep=2.61753110532407 cf
"

sean
Gold Member
Username: Insearchofbass

Post Number: 2650
Registered: Jun-04
Posted on Friday, June 10, 2005 - 04:38 pm:


displacement is .147 cubic feet. ill figure that in next so chamber one will be a tad wider now

sean
Gold Member
Username: Insearchofbass

Post Number: 2651
Registered: Jun-04
Posted on Friday, June 10, 2005 - 05:01 pm:


new demesions for chamber one including the subwoofer this time

chamber 1...24.7031(45/64) wide by 15.5 high by 23 deep=5.09644395254629 cf

chamber 2... 12.6875(11/16) wide by 15.5 high by 23 deep=2.61753110532407 cf
 

Gold Member
Username: Insearchofbass

Post Number: 3236
Registered: Jun-04
thanks trevor and enjoy your trips
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us