How should i wire my kenwood excelon 401M amp to this sub?

 

New member
Username: Rh11182

Post Number: 1
Registered: Jun-05
I have a mono amp, kenwood excelon 401m, and an audiobahn flameQ 15 inch sub, what ohm should i be running this at with this amp? Also how should i wire the 15, parallel or series or what im kinda a rookie at this any help is greatly appreciated
 

Silver Member
Username: Byrumjr

Post Number: 322
Registered: Jan-05
To get the most power out of the amp you have to pull a 2ohm load. What ohms are the sub and are they DVC or SVC? How many rms watts?
 

New member
Username: Rh11182

Post Number: 2
Registered: Jun-05
the sub is a dual voice coil and i think it runs at 1300 watts rms there are like 8 terminals on the sub 4 negative and 4 positive, very confusing since there are so many terminals for the wiring
 

New member
Username: Rh11182

Post Number: 3
Registered: Jun-05
Dual 4 Ohm Voice Coils
2 Ohm or 8 Ohm Operation
6 mm Cast Aluminum Basket
Multi-connect Lug Lock Terminals
Size: 15"
Magnet Weight: 120 oz
Power Handling: 1300 RMS
Frequency Response: 18Hz - 500 Hz
Efficiency: 96.4dB
Voice Coil: 2.5" Dual 4 Ohms
Operation: 2 Ohms or 8 Ohms
Mounting Depth: 8"
Hole Cutout: 13 3/4"
Outer Diameter: 15 3/8"


 

New member
Username: Rh11182

Post Number: 4
Registered: Jun-05
by the way thanks for the help
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us