Which one of these amps is better?

zagross New member Username: Zagross Post Number: 5 Registered: Jun-05	Posted on Sunday, June 12, 2005 - 15:56 GMT Brand: PYLE Model #: PLAD215 Condition: Brand New # 2x500W RMS at 4 Ohms # 2x1000W MAX at 4 Ohms # 1x1300W MAX at 4 Ohms Bridged # 2x700W RMS at 2 Ohms # Electronic Crossover Network # Bass Boost Circuit # Bridgeable at 4 Ohms # 2 Ohm Stereo Stable # Tri-Mode Capable # Gold Plated RCA Inputs # Line Outs for Left and Right Channel # Low Pass Filter Control # High Pass Filter Control # Remote Bass Level Control # Power and Protection LED Indicators # Red Lighting Illumination # Side Leg Mounting # THD: <0.04%. # S/N Ratio: >90dB # Input Sensitivity : 100mV ~4V # Channel Separation : >65dB # Freq. Response : 10Hz ~ 30KHz # Patent Pending # Soft Turn-on/Turn-off # Dimensions : 8.6''(W) x 2.74''(H) x 17.7''(L) PRICE 150$ ******************OR************** Brand: Lanzar Model #: HTG264 Condition: Brand New # 2x600W RMS at 4 OHMS. 2x1200W Max at 4 OHMS # 1x2400W Max at 4 OHMS Bridged. 2x1000W RMS at 2 OHMS # Electronic Crossover Network # Bass Boost Circuit # Bridgeable at 4 Ohms # 2 Ohm Stereo Stable # Tri-Mode Capable # Gold RCA Inputs # Line Outs for Left and Right Channel # Low Pass Filter Controls # High Pass Filter Controls # Power and Protection LED Indicators # Soft Turn-on/Turn-off # THD: <0.04%.>90dB # Channel Separation: >65dB # Freq. Response: 15Hz~30KHz # Subwoofer Remote Level Control # Dimensions: 9.82"(W) x 2.34"(H) x 20.47"(L) PRICE 200$ *********************************************** i am running 2 600watts RMS MTX slegghammer subs @ 2 ohms
xdrummer03 Unregistered guest	Posted on Sunday, June 12, 2005 - 19:46 GMT Hard to read the instructions. Repostwith just the RMS. An on the pyle one how does it do 2 different ratings on the same hookup setting.
david hizzle Silver Member Username: Ctx Post Number: 143 Registered: Jun-04	Posted on Sunday, June 12, 2005 - 20:14 GMT they both suck do some research
zagross New member Username: Zagross Post Number: 6 Registered: Jun-05	Posted on Sunday, June 12, 2005 - 20:20 GMT what about audiobahn i finally bought an amp and its the: AUDIOBAHN A12001DT - CLASS D 1 x 400 WATTS RMS W/ BLUE DIGITAL VOLT METER & FLAMES Class D Circuitry Multi Stranded Power Supply Toroids Double Sided Glass Epoxy Circuit Board THD: 0.05% S/N Ratio: >100dB; Frequency Response: 10Hz - 40KHz (+/- 1dB) Remote Bass Control With Blue Backlight Knobs Variable 18dB Low-pass Crossover: 50Hz To 250Hz Variable Bass Boost: 0 - 18dB Variable Bass Boost Frequency: 40Hz - 100Hz Subsonic Filter: 20Hz to 50Hz Variable Phase Control: 0¾ - 180¾ Large Display Volt Meter With blue Illumination Throughput RCA Connections 4-way Protection Circuitry: Thermal, Short Circuit, Overload, and DC Offset Dual Cooling Fans Cobalt Blue Illumination Chrome Flame Fan Grille High Gloss Chrome Plated Finish 4 Ohms Mono: 400 x 1 2 Ohms Mono: 750 x 1 1 Ohm Mono: 1200 x 1 Height: 2 1/2" Width: 11 15/16" Depth: 14 1/2" this is a good amp right? if its not its too late for me anyways lol.
Danny Smith Bronze Member Username: Audio_king Denton, TX USA Post Number: 57 Registered: Jun-05	Posted on Sunday, June 12, 2005 - 21:16 GMT yes that amp is quite a bit better than lanzar and pyle. how r u running ur speakers? in parallel? cuz that way youll get 600 each to the speakers.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us