Silver Member Username: Sx3Illinois USA Post Number: 134 Registered: Mar-05 | Would there be much difference between an 18" Ava in a sealed box and a 15" Ava in a ported box? Each running off a Hifonics BX1000D or BX1500D. |
Silver Member Username: AlpineuserWinchester, TN Post Number: 456 Registered: Mar-05 | i believe the 15 ported would be louder than the 18 sealed depending on what the box is tuned to, either way its gonna be close. |
Gold Member Username: James1115Wilton, Ct Post Number: 3337 Registered: Dec-04 | you better tune the 15 really low to about 20htz or else you will loose a lot of SQ and as far as the 18 goes it requires about 10cu/ft sealed. I am runnning my 15 at 2.5 cu/ft sealed off of about 900-1000 watts and it SLAMS and sound very nice also |
Gold Member Username: InsearchofbassPost Number: 2659 Registered: Jun-04 | james didnt you want a abc box for the avalanch 15 if so i did a double for trevor should hit from 20 hz to 55 hz or so |
Silver Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 601 Registered: Sep-04 | and i still praise you for that sean... thanks so much |
Silver Member Username: Sx3Illinois USA Post Number: 135 Registered: Mar-05 | Whats a good ported volume for 1 15" Avalanch, and what should it be tuned to? |
Silver Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 610 Registered: Sep-04 | i was told about 4cuft tuned to 20-24 hz for 1000w rms |
Silver Member Username: Sx3Illinois USA Post Number: 136 Registered: Mar-05 | Is that what your's is? |
Silver Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 612 Registered: Sep-04 | no... thats what it was going to be... now im building appx 10cuft gross ABC box.... ABC boxes require a lot of sapce... thats why it is so big... they actually limit the excursion of the sub though allowing you to put more power to the sub as long as you dont exceed the limits of the VCs |
Silver Member Username: Sx3Illinois USA Post Number: 137 Registered: Mar-05 | Do u have any dimentions for the box you were gonna make? If not whats a good web site to help you tune the box? |
Silver Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 613 Registered: Sep-04 | i was using 2 sites... one actually designs the box for you... just make sure u understand the difference between gross volume and net volume... http://www.accelerator-pedal.com/l-ported-box.htm that one designs the box^^^^^^ http://www.carstereo.com/help/articles.cfm?id+31 that one has a bunch of different info |
Silver Member Username: Sx3Illinois USA Post Number: 138 Registered: Mar-05 | What is the difference between gross and net volume lol? |
Silver Member Username: Sx3Illinois USA Post Number: 139 Registered: Mar-05 | Also what is the amount of displacement of the 15" Ava? |
Silver Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 614 Registered: Sep-04 | sry ive taken so long between posts... the gross is including pport displacement and mdf and everything... net is without port sipl. and without mdf... and the displ of the 15 ava i think is .147 |
Silver Member Username: Sx3Illinois USA Post Number: 140 Registered: Mar-05 | Thanks Trevor. If I have any more questions I'll be back. |
Bronze Member Username: BasshdPost Number: 77 Registered: May-05 | For the avalanche 18, a qtc alignment of .707 requires a 7.5 cubic net sealed box. |