|
New member Username: Bar1berWorcester, Ma Post Number: 3 Registered: Jun-05 | i just bought a hifonics brutus bx1205 mono, it says its 1200 watts, an i have 2 12inch l5 kickers.. will i need too get another amp also...i want as much power as i can get but i dont wanna blow the subs they say there 1200 watts max each.... also what would be good for my inside speakers i aslo wanna do hifonics they are kicker speakers |
|
C.Jackson Unregistered guest | You will not need another amplifier, it is perfect for the two S12L5's. The subwoofers max is a number you shouldn't go by, you should go by the RMS rating which is 600 watts. So 600x2 is 1200 RMS watts and the amp is rated at 1200 watts RMS at 1 ohm. First, make sure your subwoofers are DVC 4 ohm, because if they aren't you will kill your amplifier. You need to wire your subwoofers in parallel, I added a picture below if you don't know how.... http://www.rockfordfosgate.com/rftech/wiringwizard/2_4ohmDVC_1ohm.gif |
|
Bronze Member Username: Velk4425Post Number: 42 Registered: Feb-05 | Or if you subs are DVC 2 ohm you can just run them straight up parallel for your 1 ohm load. Either works. |