New member Username: Deltabmw
Post Number: 1
Registered: May-05
|
Posted on First can I not mix and match impendences? because if I can't than my question is answered.
Otherwise..
Okay just making sure I have the right calculations here..
Here's the setup..
Two DVC 4OHM Kicker subs
One DVC 2OHM Kicker Sub
So if I wired them in parallel I should get.. 4x4x2=32 devided by 4+4+2=10
If I'm correct they should have 3.2ohms of resistance?
the Amp is rated at 2ohms stable.. it is an infinity referance 610a..
|