well it would have to take a linear actuator and a regular actuator. the linear actuaor would bring it forward and backwards and the regular actuator would flip it open and closed. you would have to set the regular actuator on the linear actuator and hook up another relay so when the linear actuator was finished with its motion, it would then trigger the regular actuator to flip open. you would also need a relay hooked up to your ignition so that it would send electrical current to the actuators. this would take alot of wiring to do and unless you have experience with wiring stuff with relays and actuator i suggest that you get a professional to do this, and it will also cost quite a bit of money but is a cool idea.