Sub Box

Brett New member Username: Grandam95 Willoughby, Ohio Lake Post Number: 1 Registered: Apr-05	Posted on Wednesday, April 06, 2005 - 14:57 GMT Im planning on making a sub box later today and i wanted to know what was the best way to seal the box when i run the wires to the amp.I wasn't going to use terminals I was planning on just drilling a small hole in the back of the box and sealing the wires with caulk or something think this is a good idea?Anybody got a better one?
Mike5211 Silver Member Username: Araknid BOCA , FL U.S. Post Number: 386 Registered: Nov-04	Posted on Wednesday, April 06, 2005 - 15:37 GMT you can do that no problem.
Brandon Silver Member Username: Theelfkeeper Stockbridge, GA USA Post Number: 232 Registered: Feb-05	Posted on Wednesday, April 06, 2005 - 18:58 GMT any kind of sealant thats not acid base (will corode wire and cause problems) will work fine
howie feltersnatch Bronze Member Username: Goon Post Number: 72 Registered: Feb-05	Posted on Wednesday, April 06, 2005 - 19:21 GMT I did that with my last box. It worked fine for me. Just remember to give the caulk a chance to cure before you go using it. goon