|
New member Username: SsoonrDallas, Texas Post Number: 1 Registered: Mar-05 | This will be my first attempt for aftermarket car audio so any suggestions would be appreciated. I am also interested in SQ and not as concerned will SPL for my 2001 Camaro SS. HU: Alpine 9855 (not yet released) Fronts: Dynaudios 240 MK II http://www.dynaudio.de/eng/mobile/2way/240mk2.htm Sail Panels: (optional for added midbass and the dreded rearfill) Dynaudio MW 170 8" (the one off their 3-way) http://www.dynaudio.de/eng/mobile/3way/360.htm Sub in driverside hideaway box: jl 10w6 Sub amp: JL 1000/1 As far as the amp for the front channels, I would like to run 150 RMS to each channel and could do 2 x JL 300/2 but I would like to do it off of one if ya'll had any suggestions. I am also not set on the jl sub, I want a sub that is very accurate, but can be loud when it needs to be. Thanks for any input. |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 7518 Registered: Dec-03 | the 1000/1 is way too much power for a single 10W6 more isn't always better if you're going to use a 1000wRMS amp, go with a single RE triple X 10" or 12" or a similar sub able to handle that power. |
|
New member Username: ZapcodPost Number: 5 Registered: Mar-05 | Look at Image Dynamic IDMAX http://www.imagedynamicsusa.com/website/products/IDMAX.html. It would be a good fit for your amp |
|
Gold Member Username: Taylor17Kopperl, Texas Post Number: 1080 Registered: Jan-05 | Yep, Glass is right as always... either add a few more w6's, change amp's, or change sub's. Other than that, it's a nice setup. |
|
New member Username: SsoonrDallas, Texas Post Number: 2 Registered: Mar-05 | I am having trouble finding any information on the RE X's. The enclosure for the sub is somewhere around 1 cubic foot, so i dont have a lot of room to work with. Are the RE X's more spl or sq oriented? The reason for the large sub amp is to leave me with the option of another sub if I want more spl later down the road. |
|
Silver Member Username: Suleman36Post Number: 326 Registered: Feb-05 | Get a 1000/1 amp with 2 12w6v2's and go slot ported for the box. Youll be done and happy. Or you can do what im doing and go with 13w6v2's and the 1000/1 amp. Either way it'll sound good for SQ and SPL. For sure |
|
New member Username: SsoonrDallas, Texas Post Number: 3 Registered: Mar-05 | but i dont want to take up my t-top storage area... so 10's will work better for my application. I want a single 10" that will sound excellent in the restricted area that i'm putting it in, and the option of adding a second 10 if more spl is desired. The enclosure will be fiberglass, but similar to this one. http://jlaudio.com/stealthbox/camaro.html |
|
Silver Member Username: Suleman36Post Number: 329 Registered: Feb-05 | Get a JL 500/1 amp and get a 10W7 and go from there..I am selling 2 500/1's right now that are brand new on ebay right here http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=79827%26item%3D5761780104 %26 and that will sound perfect with that amp and sub. ITs a great sq/spl sub. let me know what you think |
|
Silver Member Username: JeremycKunsan AfbSouth Korea Post Number: 538 Registered: Jun-04 | If you decide to go with the 10 W6 a jl 300/2 wired at 2 ohms will be plenty of amp, and save you some $$ too. Other than that, nice set up |