I cleared the paint off under the carpet and drilled a hole and used a bolt. Also make the shortest possible ground connection. This is for high-current amps though. If it is a small amp then durans idea is okay.
wc
Unregistered guest
Posted on
Can I run the ground wire out from the bottom of my door so I can connect it to the fram of my truck?
no dont drill a hole. just find look under the carpet and find a bolt, usually there are a lot towards the back d=seat area, and just bolt it on there. not too hard, just takes a lil patience
wc
Unregistered guest
Posted on
Aight coo, see thats what I needed to know, so just find a bolt and connect it there.
don't put it on any sub-frame areas. You need a good "solid" ground that no other wires are grounded to. Also, with your car running, check your battery voltage. Next, check the voltage at your power and ground where you have your amp installed. The voltages should be real close. If not, you have a bad ground.
wc
Unregistered guest
Posted on
What would happen if you have a bad ground, fry your amp?
saffron
Unregistered guest
Posted on
EH more like it wont preform up to par and if you crank it to make it preform cheap amps may heat up and fry