12" Alpine Type-R help

AJR9987 Unregistered guest	Posted on Saturday, January 29, 2005 - 20:51 GMT I have a dual 4-ohm 12" Type-R subwoofer, and I was wondering if the extra 50W from an MRD-M350 Alpine amplifier would be too much for it to handle. Thanks
taylor17 Silver Member Username: Taylor17 Kopperl, Texas Post Number: 279 Registered: Jan-05	Posted on Saturday, January 29, 2005 - 21:07 GMT No it will be fine. I have actually hurd of people putting 500 watt's to that sub!
AJR9987 Unregistered guest	Posted on Saturday, January 29, 2005 - 21:20 GMT Thanks for your help. 500W?? Well, do you think that amplifier would be a good choice? What would you reccomend??
AJR9987 Unregistered guest	Posted on Saturday, January 29, 2005 - 21:20 GMT Thanks for your help. 500W?? Well, do you think that amplifier would be a good choice? What would you reccomend??
taylor17 Silver Member Username: Taylor17 Kopperl, Texas Post Number: 281 Registered: Jan-05	Posted on Saturday, January 29, 2005 - 21:38 GMT If you wire it to 2 ohm's, you will git the 350 watt's. Perfect for that sub.
erik Silver Member Username: Erik123456 Arlington, Tx Post Number: 372 Registered: Aug-04	Posted on Sunday, January 30, 2005 - 20:16 GMT i have run a 250/1 slash amp on one type r with the gain turned down all the way and its still pounds they dont need much more than 300 at all from what ive seen
kklagge Bronze Member Username: Kklagge Post Number: 53 Registered: Dec-04	Posted on Monday, January 31, 2005 - 12:59 GMT I have (2) 2omh DVC 10" type R's (have them wired to 1ohm) and I'm putting 450 into each and they sound excellent. They will definately handle more power than stated (possibly why the 2005's look exactly (except color)like the 2004's but say they can handle 500 instead of 300rms))
James Longo Silver Member Username: James1115 Ct Post Number: 328 Registered: Dec-04	Posted on Monday, January 31, 2005 - 13:52 GMT they dont look like the 2004's they have the New type X surround.
Bryan D Bronze Member Username: Bdonkersgoed Ontario Canada Post Number: 66 Registered: Jul-04	Posted on Monday, January 31, 2005 - 14:37 GMT I had the MRD-M301 (350W RMS amp) coulpe with a 10" Alpine Type R at 2 ohms and it was fine Until it was stolen that is No worries! Bryan
Bryan D Bronze Member Username: Bdonkersgoed Ontario Canada Post Number: 67 Registered: Jul-04	Posted on Monday, January 31, 2005 - 14:38 GMT I had the MRD-M301 (350W RMS amp) coupled with a 10" Alpine Type R at 2 ohms and it was fine Until it was stolen that is No worries! Bryan
Rob Fox Bronze Member Username: Rob315 Syracuse, NY U.S. Post Number: 54 Registered: Jan-05	Posted on Wednesday, February 02, 2005 - 04:27 GMT im going o be using 2 mrd m501's with 2 12" type r's(1241d). the amps are rated at around 600watts a piece.
David Lenz Unregistered guest	Posted on Sunday, February 06, 2005 - 05:01 GMT I'm have a type r 15" for my graduation gift and i no nothing about this. i was just wondering what amp would be the best for this
ryan kamer New member Username: Shimm57 Post Number: 2 Registered: Feb-05	Posted on Monday, February 07, 2005 - 21:47 GMT i was just about to buy a 10'' type r and the m350 amp should i spend a little more for the newer m301? the power is the same but the newer one has some other qualities that im not sure of. also, does the 12'' handle more power than the 10''?
Joe Smoe Silver Member Username: Invain Michigan United States Post Number: 413 Registered: Aug-04	Posted on Tuesday, February 08, 2005 - 01:23 GMT Uhh, no the 12's and the 10's are the same power handeling. I'm pretty sure the 15" can handle more though, 750 rms I think

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us