4 Channel Amps

Garry Clark New member Username: Gball6 Charleston, IL Post Number: 8 Registered: Dec-04	Posted on Wednesday, January 26, 2005 - 02:07 GMT I have 4 12" Audiobahn speakers that are 400 watts a piece. I was told to get a 4 channel amp. I want to get a good amp but I only have like $300 to spend. Any suggestions? if its a little more in price thats okay. Thanx
Isaac Gold Member Username: Carguy Post Number: 1206 Registered: Nov-04	Posted on Wednesday, January 26, 2005 - 05:00 GMT You don't need 4 channel amp for the subs. Get a class D mono amp that's 1200W rms and is 2 ohms stable. 4 subs wired in parallel and then in series will give you 2ohms total load. Search eBay for 1000W - 1200W rms mono amp.
lucas beckner Silver Member Username: Lbeckner Tulsa, Ok Usa Post Number: 238 Registered: Oct-04	Posted on Wednesday, January 26, 2005 - 05:47 GMT agreed. except you could also get a class d 1 ohm stable amp and wire all the speakers in parallel. same difference.
Isaac Gold Member Username: Carguy Post Number: 1209 Registered: Nov-04	Posted on Wednesday, January 26, 2005 - 14:30 GMT If you connect 4 4ohm DVC subs in parallel, you will not get 1ohm total.
matt Bronze Member Username: Mrdark Post Number: 41 Registered: Dec-04	Posted on Wednesday, January 26, 2005 - 20:22 GMT ya like .5 or .25
Garry Clark New member Username: Gball6 Charleston, IL Post Number: 9 Registered: Dec-04	Posted on Wednesday, January 26, 2005 - 21:16 GMT Any suggestions on what type of mono 1200 watt amp would be good?
Isaac Gold Member Username: Carguy Post Number: 1211 Registered: Nov-04	Posted on Wednesday, January 26, 2005 - 21:40 GMT Zapco/Orion/PPI/US Amps/JL/JBL/Audiobahn/MTX all make amps over 1000W rms.
lucas beckner Silver Member Username: Lbeckner Tulsa, Ok Usa Post Number: 245 Registered: Oct-04	Posted on Wednesday, January 26, 2005 - 23:57 GMT yes. it would be .5 ohm. i didn't know they were dvc. sorry. also kicker makes an amp too.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us