|
Anonymous | hello, i just made a vented enclosure for my 15" triple X. i constructed it with 3/4" MDF wood, 1 5/8" screws, and liquid nails. I painted the outside of the box and also put coat of polyurethane sealant ontop of the paint. my question is would i need to put anything on the inside of the box, like the polyurethane sealant i used on the paint?? |
|
Silver Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 317 Registered: Mar-04 | silicon all the corners...make sure its air-tight. |
|
Bronze Member Username: Rob_brownPost Number: 49 Registered: Jul-04 | Would you mind sharing that box design? If not could you e-mail them to me at bertobrown@aol.com. I have been meaning to call RE and ask if they have the specs for a 15 available. Thanks Robbie Brown |
|
Silver Member Username: HdubbFarmington, Nm Usa Post Number: 385 Registered: Nov-04 | use liquid nail to seal it |
|
Anonymous | i already used the liquid nails, and painted and sealed the outside, i just wanted to know if i should polyuratane seal the whole inside in case it got wet. its a vented box, and if some water got in it it would mess the box up.... would it hurt to seal the whole inside? |
|
Anonymous | i already used the liquid nails, and painted and sealed the outside, i just wanted to know if i should polyuratane seal the whole inside in case it got wet. its a vented box, and if some water got in it it would mess the box up.... would it hurt to seal the whole inside? |
|
Anonymous | ? |
|
Silver Member Username: RzarectorCoquitlam, Bc Canada Post Number: 144 Registered: Dec-04 | no leave the inside as is only thing u need to put inside is polyfill if its needed |