Speakers

Cory Mowery New member Username: Campthree2005 Post Number: 1 Registered: Dec-04	Posted on Thursday, December 23, 2004 - 22:45 GMT This might be a stupid question but what do i need to hook up 2 speakers directly to my head unit without a amp. My head unit is Alpine CDA 9825
GlassWolf Gold Member Username: Glasswolf NorthWest, Michigan USA Post Number: 6805 Registered: Dec-03	Posted on Thursday, December 23, 2004 - 23:06 GMT just speaker wire, really. 18AWG should be plenty.
Cory M. New member Username: Campthree2005 Post Number: 2 Registered: Dec-04	Posted on Thursday, December 23, 2004 - 23:08 GMT don't i need to get rca jacks to hook it up to the head unit
Cory M. New member Username: Campthree2005 Post Number: 3 Registered: Dec-04	Posted on Thursday, December 23, 2004 - 23:13 GMT were would i run the speaker wire to is what i'm tryin to say
GlassWolf Gold Member Username: Glasswolf NorthWest, Michigan USA Post Number: 6809 Registered: Dec-03	Posted on Thursday, December 23, 2004 - 23:18 GMT RCAs are only to run to an amplifier. the alpine has speaker leads. you connect those, via the speaker wires, to the terminals on your speakers. this is all diagramed and explained in the alpine manual which comes with the 9825 and can be downloaded from alpine1.com
Cory M. New member Username: Campthree2005 Post Number: 4 Registered: Dec-04	Posted on Thursday, December 23, 2004 - 23:30 GMT o lol well thanks i guess i didn't look very hard at the back of it lol so 18G is good for 2 Pioneer 6X9's
GlassWolf Gold Member Username: Glasswolf NorthWest, Michigan USA Post Number: 6820 Registered: Dec-03	Posted on Thursday, December 23, 2004 - 23:59 GMT plenty. yes. you can use 16ga if you really like.. either is fine. radio shack sells both on a spool of about 50 feet. that'd be 25ft per side.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us