|
Anonymous | If my amp doesn't have a remote bass control, would it be a good investment to purchase a bass driver? would it act like a bass remote? |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5950 Registered: Dec-03 | the only thing that would really act as a bass level control like you want is a pre-amp with a bass frequency EQ setting, an EQ, or a remote attenuation circuit if you can find or build one that attenuates the RCA line level signal at the amplifer's input stage. |
|
Anonymous | is this what your talking about Glass? http://shop.store.yahoo.com/mobile-emotions/bacoreforany.html |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5958 Registered: Dec-03 | exactly. it's an attenuator that goes inline with the amp. I just didn't have any specific links to one. thanks for the footwork. |
|
Bronze Member Username: Jwbulger79Florida Post Number: 43 Registered: Nov-04 | yeah, thanks dude. that's exactly what i have been looking for also. |
|
Bronze Member Username: ThumprmsDaltonUSA Post Number: 60 Registered: May-04 | no problem just happened to stumble across it, thanks glass i just ordered it, hope it helps |
|
Bronze Member Username: ThumprmsDaltonUSA Post Number: 61 Registered: May-04 | Glass how would i go about hooking this attenuator up to my amp. Do i have to plug anything into the head unit? |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5987 Registered: Dec-03 | head unit -> RCA cables -> sub level controller -> RCA cables -> sub amplifier |
|
Bronze Member Username: ThumprmsDaltonUSA Post Number: 71 Registered: May-04 | all i get is some low bass noise when the hu is off. with the hu on the sub has bass but its very weak. the sub is barely hittin. i even turned the gain up on the amp and nothing. |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 6256 Registered: Dec-03 | then something isn't wired right. may be a bad ground somewhere, also. |