Thug Life
Unregistered guest
Posted on
Monday, January 26, 2004 - 00:40 GMT Would this amp be good for two alpine Type-r 10s or should i get the B.P. 1200?
New member
Username: Glasswolf Post Number: 868 Registered: 12-2003
Posted on
Monday, January 26, 2004 - 03:16 GMT the 600.1 will give each sub 300wRMS, if each sub is 4 Ohms. try to match the subs as closely to the amp power as possible.
Thug Life
Unregistered guest
Posted on
Monday, January 26, 2004 - 15:11 GMT each type-r is 100-300 watts rms and 1000 watts max, so go with the 600.1?
New member
Username: Its_bacon12 Post Number: 56 Registered: 12-2003
Posted on
Monday, January 26, 2004 - 16:45 GMT yes do that....it wont matter if they are dual 4 ohms or single 4 ohm each, the bp600.1 will run 600w rms at 2 ohms and at 1 ohm, better off running two 4 ohm single VC subs cuz then you get better damping factor off the amp, but hey either way will work
New member
Username: Its_bacon12 Post Number: 71 Registered: 12-2003
Posted on
Thursday, January 29, 2004 - 03:17 GMT yes go with the bp600.1 its a great matchup