New member
Username: Doitbig22 Frankfort,
Ky
Us
Post Number: 4 Registered: Oct-04
Posted on
Tuesday, October 19, 2004 - 02:46 GMT I HAVE A 2 JL 12W7 AND ONE JL 1000/1 CAPABLE OF 1000 WHATS NO MATTER WHAT OHM OR WHICH WAY U HOOK IT UP. I AM TRYIN TO SELL THE SUBS FOR 750 PLUS SHIPPING AND THE AMP FOR 525 PLUS SHIPPING OR BOTH FOR 1100 PLUS SHIPPING.
Silver Member
Username: Chevy_for_life Post Number: 125 Registered: Sep-04
Posted on
Tuesday, October 19, 2004 - 03:01 GMT that amp is only rated at 1000 watts for 1.5-4 ohm.. so if you run it at 1 ohm u could Fu<k it up.. Rated Power: 1000 W RMS @ 1.5 ohm-4 ohm (11V-14.5V) THD at Rated Power: <0.05% @ 4 ohm S/N Ratio*: >95dB below rated power Frequency Response: 5 Hz-500 Hz (+0, -1dB) Damping Factor: >500 @ 4 ohm/50 Hz Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 19.7"L x 9.25"W x 2.36"H Differential-Balanced Input Topology: (1 pair of inputs) On-board Crossover: fully-variable (40-200 Hz), selectable-slope LP (12 or 24 dB per octave) Preamp Output: 2-channel (independent active filter, parallel with amp filter or full-range) Bass EQ: parametric with variable boost up to 15dB and Remote Bass Control (optional) Infrasonic Filter: fully-variable 24dB/octave from 15-60 Hz Output Polarity Reversal: switch permits instant output polarity reversal Dual mono speaker output connections: accept up to 8ga. wire +12V and Ground connections: accept 4ga. wire (required) and sells for 799.99 brand new
Gold Member
Username: Glasswolf NorthWest,
Michigan
USA
Post Number: 4872 Registered: Dec-03
Posted on
Tuesday, October 19, 2004 - 14:13 GMT on a side note, the 1000/1 puts out quite a bit more than it's "rated" power, as do all of JL's slash series amplifiers. very nice amp. are those 12W7s in a JL enclosure?