|
New member Username: R0lsenWilmington, NC Post Number: 1 Registered: Jan-05 | Can you use RG6 Coax cable with RCA adapters on the ends for audio cables. I have bunch of RG6 cable and all my system cables (red, white, and yellow) are all cheap ones. So I thought I could buy a bunch of ends and RCA adapters and make my own cables, I might come end up with some quality cable instead. Any thoughts? |
|
Lester Unregistered guest | Short answer... Yes. L. |
|
New member Username: R0lsenWilmington, NC Post Number: 2 Registered: Jan-05 | Thank You. Since my post I have found a good web site on how to do just that. http://white.hometheatertalk.com/diycable.htm |
|
Lester Unregistered guest | Yup! The canare route would have been in the slightly longer answer. And although it's a good system, it's also a bit pricey for a couple of cables. If you are going to spend that kind of money, I would suggest using RG59, solid copper coax w/braided copper shield instead of RG6. L. |
|
New member Username: R0lsenWilmington, NC Post Number: 3 Registered: Jan-05 | Not sure if I'm going to follow that web site exactly, but something along those lones. I will be using RG6 cable since I have about 150ft left over from another job. Thanks |