Strange problems BEV and Charlie

 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1625
Registered: Oct-06
Can someone please goto TotalFTA-com
Tell those sorry Azzes moderators

Tell them as following King says:
- I do find polarity problem affecting users with VU-Sat Xtreme and 3 satellites.
- Mainly users with Twin LNBs 110/119 connected to external switches.
- The symptoms forces auto roll and showing wrong satellites.
- There is no fault at alignment.

The sorry Azzes moderaters tell the nubies to move their dish.
I can't leave my foot prints at TotalFTA
Sometimes I can read their comments and sometimes it asks me for passwords.

Please go help those poor nubies
Moderators are telling them wrong fix
If yo don't believe me go check dozens of thread under VU-Sat Xtreme

King
 

Gold Member
Username: Donnie1973

Post Number: 1254
Registered: May-06
How did u come to the conclusion it is hardware and only on the extreme? u give no way to fix...
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1626
Registered: Oct-06
Yo may say I am a semi-expert

Check these threads at Total FTA-com:
And check how many people read it with few replies
- strange port problem
- I find this really strang Please help! ( 1 2)
- Oct 16th D* down again
- port 1 and 2
- Extreme TP issues
- No video/no audio. autorolling..????????
- Those with PIN problems
- Problems loading sat
- Help Some Tp 110 No Work Vs

And the same poor Azzes still can't put the 2 and 2 together
For this LMAO
 

Gold Member
Username: Donnie1973

Post Number: 1258
Registered: May-06
so how do u fix it? Take out switches? LNB's? Have u tested this? If u take out the switch, will it roll?
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1628
Registered: Oct-06
Yep
100%
No switches
Polarity problem I detected it last week
It is not a realy big deal it maybe solved easily
But hardware can drive noobs nuts
 

Gold Member
Username: Crazy_greek

Post Number: 1245
Registered: Jul-06

Hey, King
I would like to try to do some testing.
What type of equipment would I need?

BTW I mean the kind of testing that you do.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1630
Registered: Oct-06
Are yo being sarcastic? or yo mean true tester?
 

Gold Member
Username: Crazy_greek

Post Number: 1247
Registered: Jul-06

Hey, King
By all means NO I am for real.
I don't know what you mean by true tester.
I would like to try & do the type of testing
that you do.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1636
Registered: Oct-06
I'm kind of done with all my tests for now
I was looking for clues
I found what I was searching for
All turned out to be movements of newer HD channels
All were done at night time
They just got my attention
Nothing interesting anymore

A true tester is finding things first hand
Yo are one true tester
Just by scanning all birds first hand
It is hard to communicate with yo when yo are sarcastic.
But yo are OK
Peace bro
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1642
Registered: Oct-06
They still don't know what is going on at totalfta
Maybe someone got the courage to tell them?
Please do
 

Gold Member
Username: Cartier1

Post Number: 1260
Registered: Feb-07
king i took big risk of being banned you know that . i posted your comments as it is . now what may happen we will see tomorrow.
 

Gold Member
Username: Cartier1

Post Number: 1261
Registered: Feb-07
king since u do testing . how can u solve a problem with ddp.
dish 500 with twin dpp 110/119 dihs 500 with 1 dp for 61.5.
110/119 works ok .61.5 the signal comes and then goes for good .
im aware of so many suggestion as leave one receiver on and bla bla bla . but what you think the right solution .????
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1645
Registered: Oct-06
Hello Cartier the first
I heard yo own the forum now
Congratulations

I told the entire forum 10 days ago
DN added some type of analog signal causes polarity conflict for friendly users who are using generic FTA receivers in particular VU-Sat extreme.

I don't know what signal. The only way to remove it is to add a low pass filter or band pass depending on the tone signal?
Right now affecting only few VS products but soon I expect more to follow.


Charlie is playing slick
The only solution I can recommend at the moment is to use an A/B switch.
These type of things can't be easily resolved in newer bins I would only guess.

I lost my coaching job
So now I'm working on sound systems for a new church
I'm sick and tired of Satellites for now.
 

Bronze Member
Username: Dr_dss

Post Number: 54
Registered: Sep-07
Well if anyone decides to use a A/B switch. Make sure to power down before toggling the switch. Because small voltage spikes can do damage!
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1646
Registered: Oct-06
Another easy way to get by without an A/B switch

Is to use SAT button
For example select BEV package only, or echo 3, Select echo 7 package or echo 8,10 packackage only etc.
This can work like a switch without hardwire.
Yo might see few seconds of auto roll but should work perfectly.
 

Bronze Member
Username: Dr_dss

Post Number: 56
Registered: Sep-07
Sorry you not making sense on that one. Inorder for all the sat's to be live and connected you would have to have some kinda switching install. When u make a selection like that of what you mention above by selecting a single package or what have you. It still uses your current DiSEqC setings or what have you.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1647
Registered: Oct-06
Sorry, yo are right
Must use current DISEqC switch and then enable/disable from SAT button
 

Gold Member
Username: Cartier1

Post Number: 1263
Registered: Feb-07
king here is the feed back: from total fta

i took off the user names :


c/p:

Senior Member Join Date: Feb 2006
Posts: 391



--------------------------------------------------------------------------------

thats why the more experianced poster will suggest that they always run a direct feed from a suspected misaligned antenna, we would advise this before going into such evasive actions to test the actual unswitched signal to see what is actually being feed to the tuner regardless of the box's switch setting's.
__________________
just ask me, and i can tell you how you can fix any sat recver you got, dead or alive, oem or aftermarket


#3 14 Hours Ago

Senior Member Plus Join Date: Jul 2006
Posts: 571



--------------------------------------------------------------------------------

I haven't noticed any of these issues posted by the true tester?




#4 9 Hours Ago
Senior Member Join Date: Apr 2006
Posts: 459



--------------------------------------------------------------------------------

Yeah - right.

This true tester has apparently been here to see that people are providing the 'wrong' advice yet has to leave this site, go to another and ask someone else to post for him.

Since he has to log on to read the forums, reads the forums. logs off, logs on to another site and then posts there, I think I find this a least a little difficult to comprehend.
__________________
They tried to make me learn, but I was too tough for them.




#5 9 Hours Ago

Member Join Date: Oct 2006
Posts: 32

Auto Roll Do Work,

--------------------------------------------------------------------------------

Who are u guys learn to find your answers in the search section of forum & your manual & STOP WAITING TO BE SPOON FED.I am running extreme,ultra,flu no problems at all, go do some reading on said subjects & STOP MAKING STUPID SUGGESTIONS.HAVE A GOOD DAY HOPE U WILL FIGURE OUT WHAT U ARE DOING WRONG.




#6 9 Hours Ago

Moderator Join Date: Jan 2006
Location: Total-fta
Posts: 3,414



--------------------------------------------------------------------------------

Makes me think he has coppa status here that means he can log on and read but cannot post.This is done to members that come here to post improper info or like to post flaming bashing post.
Carlman7 the caps are not nessary altho you are correct if members would do there homework insted of wanting to be spoon feed they would not get the wrong info.
__________________
Total FTA The Way Free To Air Was Meant To Be,and only Free To Air i nor this site condone Satellite signal theft. My posts are based on what i have learned reading these forums.
Totalfta site rules
When posting help us help you



#7 9 Hours Ago

TotalFTA Supporter Join Date: Oct 2006
Posts: 1,247

This is the first time I have heard of the VU-Sat

--------------------------------------------------------------------------------

Quote:
Originally Posted by yanniss
this is a message by someone that is true tester and wanna give u the message . he said he wants this issue to be adressed to moderator. please im just trying to help . maybe this post will help thanx in davance.

c/p



Is this a new line of receiver's?




#8 9 Hours Ago

Senior Member Join Date: Apr 2006
Posts: 459



--------------------------------------------------------------------------------

Thanks . Didn't know there was a status that allowed Viewing Only.

That still doesn't make the post any easier to comprehend.

Being intimately familiar with a few setups involving 3 sats and multiple Viewsat Extreme receivers (and other Viewsat models), I have not witnessed or been made aware of the polarity problems identified by the original poster. Of course that doesn't mean they don't exist, just not present anywhere I have seen.
__________________
They tried to make me learn, but I was too tough for them.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1648
Registered: Oct-06
They don't know that there is a problem yet cuz not everyone complaining
Well that is normal for not everyone got same LNBs with same settings
They will eventually get it
Thanx for the messenger
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1685
Registered: Oct-06
They don't have bins for VU-Sat yet cuz of the strange polarity that I came across on October 15th
The polarity shortly disappeared and then back on yesterday affecting only VU-Sat xtreme.
Can this be a cause or affect?
dunno, but it is there like ghosts
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us