Port area with flared ports?

ryan shaw New member Username: Ryanwshaw Post Number: 8 Registered: Apr-10	Posted on Friday, June 18, 2010 - 16:03 GMT would 2 6" flared round ports be enough port area for 2 18" FI Q's in a 15 foor enclosure?
Joe Gold Member Username: Delsole Post Number: 1630 Registered: Feb-05	Posted on Friday, June 18, 2010 - 16:15 GMT whats the cubic feet of the enclosure and what are these going to be tuning to?
ryan shaw New member Username: Ryanwshaw Post Number: 10 Registered: Apr-10	Posted on Friday, June 18, 2010 - 16:18 GMT 15 cu ft, 7.5 for each driver, tuning to 28 hz most likely
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5631 Registered: Oct-05	Posted on Friday, June 18, 2010 - 19:51 GMT The 2 6's have 56 sq inches of port and if my math is correct off the top of my head it's somewhere around 4 sq inch. per cubic foot. It could work well, since aero's are so efficient, but if it were me I would add 1 more 6" for a total of 3.
Kyle Longbrake Gold Member Username: Kyle_lowe Post Number: 1157 Registered: Apr-06	Posted on Friday, June 18, 2010 - 22:23 GMT there is a guy that is on either ca.com or caco.org, i can remember, but he makes some nice 8" diameter flared ports. you might want to look into those
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5634 Registered: Oct-05	Posted on Saturday, June 19, 2010 - 01:18 GMT ^^, yea, try looking in the for sale section there, i was looking at them a couple weeks ago.
deathoob Silver Member Username: Gcs8 Atlanta, Ga Post Number: 600 Registered: Sep-09	Posted on Saturday, June 19, 2010 - 09:46 GMT are you talking about toolmaker?
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5638 Registered: Oct-05	Posted on Saturday, June 19, 2010 - 18:31 GMT I believe so Charles.
sean Platinum Member Username: Insearchofbass 2 hifonics 2607s, 2dcSounds12xls SPL\idmax12SQ Post Number: 14446 Registered: Jun-04	Posted on Monday, June 28, 2010 - 14:34 GMT toolmaker made my brothers custom fuse block.....my brother is happy
dBlk Gold Member Username: Deadrabit Marionville, MO Post Number: 2455 Registered: Jun-07	Posted on Monday, June 28, 2010 - 14:47 GMT i think 8" is really what ur looking for

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us