New bay and woodworking area for Desiard St Pawn

 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7897
Registered: Mar-04
The boss-man here at the shop bit the bullet and bought the old Johnny's Pizza building next door, we are turning it into a woodworking area and install bay.
Floor layout is 24' x 66'. Wood shop will be 24' x 18', install bay will be 24' x 48'.

We finally go all the city and state paperwork together, so let the fun begin!



Upload
Upload
Upload
Upload
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7898
Registered: Mar-04
Upload

Back wall of the building w/ the old bathrooms, gotta get rid of those.
Upload
Upload
Upload
Getting a hole cut in the back wall for a 14' wide roll-up door.

Upload
Upload
Upload
The building is pretty well built...lol

Upload
The old hood from the ovens when it used to be the original Johnny's Pizza here in Monroe, La. This is the building the pizza chain started in.

The front half of the building is built down to 8ft ceilings, we are ripping those out to match the back 14ft ceilings throughout the building. The nonload-baring walls in the center are going to be knocked out and a new wall built up front to separate the woodworking area from the install bay.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7899
Registered: Mar-04
Getting rid of that built-down ceiling up front.

Upload
Upload
Upload
Upload

Clearing it out and getting back to it tomorrow after closing.

Stay tuned.
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22252
Registered: Jun-06
Expansion is nice. Business must be good.
 

Gold Member
Username: Dustin3

Box Designer & Builder...Dustin

Post Number: 5393
Registered: Oct-05
Is this your business canaan? Or are you employed by them?
 

Silver Member
Username: Kdryden

Post Number: 138
Registered: Dec-09
Gratz i hope it works out, looks like the mark up will go up now since youve gone legit lol j/k

good luck and all the best
 

Silver Member
Username: Simple_smith

Lapeer, Michigan United States

Post Number: 293
Registered: Dec-08
That looks hella fun. looking forward to updates!

could you throw in some pics of the current shop?
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7900
Registered: Mar-04
im an employee...kinda the shop gopher.

cory's dad, buddy, owns the place. we are the small shop locally, but growing. we carry mainly underground and less-known brands. DD, Arc, dB Drive.
 

Gold Member
Username: Dustin3

Box Designer & Builder...Dustin

Post Number: 5395
Registered: Oct-05
That's great canaan. You should get some CNC's up in there :D
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7901
Registered: Mar-04
ill get some pics of the store front and current bay up tomorrow. we plan to turn the current bay into a dedicated tint bay.

we pretty much stand out amoung the other local places because we sale both new and used car audio.
 

Silver Member
Username: Simple_smith

Lapeer, Michigan United States

Post Number: 294
Registered: Dec-08
Thats bad azz. I wish there was a shop like that near me....
 

Platinum Member
Username: Insearchofbass

York, Pennsylvania

Post Number: 13555
Registered: Jun-04
Congrads I wish you all the best
 

Silver Member
Username: Gcs8

Atlanta, Ga

Post Number: 275
Registered: Sep-09
<< excited for more pics of how this is gonna turn out.

also nice use of the florescent lighting.
 

Platinum Member
Username: Rovin

1 15 = 152.5 DBs ...Trinidad & T...

Post Number: 16027
Registered: Jul-05
will take some work to get it up to mark but the potential is there


was gonna say CNC if yall cud afford it but bm3 beat to it ...
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7904
Registered: Mar-04
CNC is pretty much out of the question. Not enough space, not enough $$$.

I'm posting from the shop now, we have been next door working on the new shop most of the day. Buddy just cut his finger and made a blood-trail all the way back over to the shop...lol. Not really all that bad a cut, but bled like hell. Got some pics coming as soon as we shut down for the day.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7905
Registered: Mar-04
Upload
Upload
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7906
Registered: Mar-04
Upload
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7907
Registered: Mar-04
Upload
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7908
Registered: Mar-04
Upload
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7909
Registered: Mar-04
Upload
Most of the insulation bagged up.



Upload
Upload
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7910
Registered: Mar-04
Upload

Pretty much the stopping point for today.
Knocking the walls out and dropping the AC unit this week.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7911
Registered: Mar-04
Upload
 

Gold Member
Username: Tejcurrent

Post Number: 2138
Registered: Apr-07
Are you redoing that checker-board floor?

A lot of work done and still to go, I like the pics.
Business must be good, seems every shop in the area is going under and you guys are growing.
 

Gold Member
Username: Basebalz13

Moneta, Va Usa

Post Number: 2045
Registered: Aug-07
niiice!!!!
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22260
Registered: Jun-06
Good progress. I know a few superstitious ppl who would be freaking out over the last pic. Look at all those orbs lol. The place Must be haunted!


 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7912
Registered: Mar-04
the wood working room will be where i see the checkerboard floor, the install bay area will be bare concrete.

as for the orbs...insulation on the lense :-)
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22261
Registered: Jun-06
Ya lol.
 

Gold Member
Username: Hittin1

TEAM REVOLUTION, La. Lake Charles...

Post Number: 4307
Registered: May-07
hell ya!
 

Bronze Member
Username: Gutteer

Post Number: 16
Registered: Feb-10
that looks freaking sweet i cant wait 4 more pics
 

Gold Member
Username: Van_man

Boston South, MA

Post Number: 5198
Registered: Mar-06
Yea, Best of luck.
Around here audio shops are dropping fast.
Last year 3 around my area closed. All did custom install.
Even my buddy is slow as hell, He is considering closing down, If it wasnt for winter remore start installs,($199 installed) he would have gone under allready.
 

Gold Member
Username: Shortysetnies

Andrew Capps, NC US

Post Number: 3527
Registered: Mar-06
lookin good man. I love a nice construction project
 

Gold Member
Username: Tatonka

-[Team Audible Insanity]-

Post Number: 3301
Registered: Mar-07

quote:

Yea, Best of luck.
Around here audio shops are dropping fast.




We are also a pawn shop. It is during these times when we are the busiest.
 

Gold Member
Username: Jkidder

Worlds gunna end, In 2012

Post Number: 4199
Registered: Nov-05
ill man, good luck brotha
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2963
Registered: May-07
I'd keep the checker board floor
 

Gold Member
Username: Shortysetnies

Andrew Capps, NC US

Post Number: 3529
Registered: Mar-06
ditto
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7922
Registered: Mar-04
Checkerboard floor is staying, that area is going to be my pimpin' wood working room :-)
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7925
Registered: Mar-04
More pics of progress...


Upload
Upload
Upload
The building's walls at ~13inches thick Chicago brick, contractor had hell cutting it out, lol

12' roll up door going in the back of the shop.













Oh...and chits about to go down...lol

Upload
The rental place just dropped off the bob-cat, got some clean-up to do and some interior walls to get rid of.
 

Platinum Member
Username: Insearchofbass

York, Pennsylvania

Post Number: 13661
Registered: Jun-04
I was just thinking. If the car stereo shops go down so will the audio companies they represent. But then I realized what it will take is for them to sell online to survive which I see as doable. I mean in a sense yes ebay is bringing the shops down but if im seeing this right what is actually happening is a restructure to what I just suggested. The only problem is then you dont have custom install shops surviving unless they can join in on discounts below the online pricing structure. Am I right here guys? Is this the future?
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22317
Registered: Jun-06
Not to mention the internet is a wealth of resources outside of discounted/wholesale products. Forums just like this one help to educate and influence more ppl to attempt it themselves. (Like building boxes). After all why pay for service or knowledge when so many ppl keep are available to give advice for free? EVERY business has been impacted by the net. If your company doesn't have a website you need one. Even my freaking local tiny pizza joint has a website. Who orders pizza over the net lol? Nobody, but they have one.


When was the last time you rented a porn0 or bought a map? Referred to an actual encyclopedia or waited until 10pm to get the weather on the local news? And Xmas shopping? I'd guess 75% of you did most of it online like me. Malls are dropping like flies and the USPS is hurting worse than ever. All thanks to the internet.

To survive means to increase your inventory numbers to remain competitive on your prices. Wanna sell furbies on Ebay? Just remember there's a guy somewhere with a warehouse FULL of them who can undercut your price by 25% because of volume. Then there are the ones willing to sell at zero profit just to maintain complete market saturation. After all the last man standing is the winner no?

Like my knives I sell. As a business venture I'd far rather sell 1000 knives at $1 profit each than 100 at $10. Exposure is key. Leave them wowing and they come back.
 

Platinum Member
Username: Insearchofbass

York, Pennsylvania

Post Number: 13664
Registered: Jun-04
"Who orders pizza over the net lol? Nobody, but they have one"

I order papa johns over the net when they have online specials.

Ill read the rest of your post now haha
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22319
Registered: Jun-06
Lol. You got me then. The internet has been such a leap forward in many ways but has robbed so many mom and pop shops in every industry of their livelihood.

After all, do you care if a business in Detroit goes under because you found your item for $1 less online?

So many stores simply get bigger and bigger. Home improvement chains, drug stores, supermarkets, ect........



Complete market saturation is the biggest weapon they have.
 

Silver Member
Username: Kdryden

Post Number: 142
Registered: Dec-09
Its funny because this week i was at a shop (not a mom and pop shop but silt) and i told him i felt bad since hes not busy. And he said that if was to rely only on audio he wouldve tanked already, and these guys really good quality work. He said 2002-2003 were the best years and that now everything comes to the bottom line. People dont understand the amount of money and time it takes to do installs. I told him i completely agree and i know he doesnt make much money. If he makes a 1" box a sheet of mdf is 75$can so one sheet plus labour and the material he has no choice but to charg 250$ for a box but people wont pay it, they rather buy shitty prefabs that cost 100$ and have shitty sound, y all because of the bottom line.

The worst thing is, if somebody decides to make there own box he would save maybe 30-40$ doing it himself.
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22320
Registered: Jun-06
I feel ya. As a consumer in today's time though it just isn't in the small shops' favor. Regardless of industry. It's taking the "flavor" out of what you love. I myself will NEVER go to my local hardware store for anything. Even though it may be run by a great family with very decent ppl I just can't pay the exploded prices compared to the chain stores.

And I'm all for do-it-yourself. You gain so much by getting your hands dirty. You can't buy experience in anything. You learn by failing and eventually succeeding.
 

Gold Member
Username: Wolf_hound

Phoenix, AZ

Post Number: 1156
Registered: Sep-05
i order pizza online too lol get better discounts....
 

Gold Member
Username: Big_edge_head

Milwaukee, WI

Post Number: 4298
Registered: Mar-07
fatass^ too lazy to pick up a phone.
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22324
Registered: Jun-06
That means there's someone who gets paid to monitor a computer screen for online orders? Lol. I've ordered 1000's of things online but food was never one of them.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7926
Registered: Mar-04
Well, go the old walls knocked down and starting to clean up.

Upload
Upload


Now that it is opened up, it looks a hell of alot bigger.
 

Silver Member
Username: Simple_smith

Lapeer, Michigan United States

Post Number: 303
Registered: Dec-08
and speaking of ordering food online, jimmy john's does that too lol.
















and i know that cuz i work there!

oh and Canaan, its looking good man, but it will be cluttered before you know it lol
 

Silver Member
Username: Simple_smith

Lapeer, Michigan United States

Post Number: 326
Registered: Dec-08
update?
 

Gold Member
Username: Tejcurrent

Post Number: 2166
Registered: Apr-07
Looking good, update please :-)

I order dominos pizza online, I think the guys are rude on the phone and I can visually confirm my order. Having some guy tell me 15-45 minutes and it'll be done, or have the choice to wait for an email to my phone saying it's done? I'll take the email please.

Most people I talk to let others do their audio work out of fear of serious damage to their vehicle, or simply wasting money on ruined supplies.
 

Gold Member
Username: Wolf_hound

Phoenix, AZ

Post Number: 1160
Registered: Sep-05
this thread is certified fail. no updates ftmfl.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana Team Audible...

Post Number: 7946
Registered: Mar-04
Updates coming feg.
 

Diamond Member
Username: Wingmanalive

Www.stainles... .ecrater.com

Post Number: 22562
Registered: Jun-06
Rome wasn't built in a day.
 

Gold Member
Username: Ducka

Shelby Twp., MI United States

Post Number: 1392
Registered: Jan-08
Yeah, but Rome is a lot cooler than this thread.
 

Silver Member
Username: Boston_spl

Highland, CA United States

Post Number: 153
Registered: Nov-08
"I'm all for do-it-yourself. You gain so much by getting your hands dirty. You can't buy experience in anything. You learn by failing and eventually succeeding."



Truer words were never written Paul.
 

Silver Member
Username: Skdooley

Roanoke, VA Usa

Post Number: 451
Registered: Oct-09
Speaking of new/expanding car audio shops, a new one just opened here in town. That's great and all but they're going to have to compete with a larger car audio shop who has two places here in town and have been around for a long time. It's good to have competition but they're selling the same products as this other company. To me, I think if you want to suceed you should offer products you can't get anywhere else in town. You can offer the same products as the other stores but push names people don't know of, that still make quality products. I don't know how the whole business works with setting up contracts with distributors but I think Digital Designs would be a great name to get into the area. Give the other company business they can't compete with.
 

Bronze Member
Username: Gutteer

Post Number: 79
Registered: Feb-10
bump
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us