Kbox hero help
|
New member Username: BarchamGlenview, Il Usa Post Number: 4 Registered: Aug-06 | my kbox hero shows H1 then now power after laoding B180 factory file any solution from the experts ? |
|
Platinum Member Username: PlymouthCanada Post Number: 11763 Registered: Jan-08 | Sam Read this thread: https://www.ecoustics.com/electronics/forum/home-video/601718.html  |
|
New member Username: BarchamGlenview, Il Usa Post Number: 5 Registered: Aug-06 | thanks for your replay . I tried everything but it didn't work . the gray and the blak kable no luck . the problem is that the box is showing the H1 on the front then nothing else . there is a light red light on the standby which shows that there is some power there . |
|
Bronze Member Username: Chacha_chaudharyPost Number: 22 Registered: Dec-07 | Sam u got to change the Bios setting Just follow the below and do the default setting and load the new file. Kbox Plus And Prodigy Secret Bios Turn Off Kbox From Back Switch Now Press Channel + On Kbox Plus While Turning On Power From Back Switch Leave Channel + Button Pressed Now It Will Show Some Weird Display 01a6 You Need To Have Kbox Hooked To Tv To See Screen You Will See First Option 1-system Test If You Press Ok On Remote You Can Check Flash Here 2-live Test 3- Video Test 4- Audio Test 5-rf Modulator Test 6-front Panel Test 7-usb Test 8- Default Settings With This Option If You Have Any Problems It Will Default All Settings To Factory On The Prodigy Is The Same Steps Only You Press Volume + Instead Of Channel + (it Might Work With Channel Plus Not Sure) To Exit Bios Just Turn Off From Back Switch And On Again |
|
New member Username: BarchamGlenview, Il Usa Post Number: 6 Registered: Aug-06 | thanks for your replay . I tried that but it didn't go to the BIOS . it is showing no signal . I tried with chanal + and with audio + but it didn't work . what might be the reason ? |
|
Bronze Member Username: Chacha_chaudharyPost Number: 23 Registered: Dec-07 | Try it several times just after turning it on Try these combos, dont use the Remote Standby and volume + together Standby and Channel plus together If it goes 01a6, press 8 on remote good luck I tried it just now and it worked |
|
Platinum Member Username: NydasPost Number: 16744 Registered: Jun-06 | sam bacham: You are right. It can get very stubborn, and you start getting an ache in the wrist. If you can get it to factory service,, just install the first factory Bios on it and give it to them! |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics