|
Bronze Member Username: Bryanwalsh524Post Number: 69 Registered: Sep-04 | Ok so i have a 10" stroker and i took it out of the box cause it was smoking and stuff. the idiot who put it in wired it completely wrong and im the idiot for letting him to it. but what my question is; is if my sub is smoking and smells like fried plastic will "reconing" it fix this or is the problem worse and im completely screwed? the sub does move and stuff but it just smokes and pretty much "ratttles" like crazy. I seen the recone kits for this sub for 60-80 bucks. and i been looking all over but no luck does anyone know where to find tutorials for reconing a stroker subwoofer? I have a Stroker 102. Thanks in advance for anyones input. -Bryan |
|
Silver Member Username: PoprocksPost Number: 183 Registered: Mar-09 | Clipping the amp is a killer. Set gain correct. http://www.bcae1.com/gaincon2.htm Build box to the subs spec. http://www.cerwinvega.com/service_components.php |
|
Silver Member Username: KravenbloodThat one, Ohio Post Number: 452 Registered: Aug-05 | they are pretty easy to recone you just have to watch out the ring isnt very strong make sure you scrape out all the rubber from the surrond in the channel it sits in i want to say theres 8 screws around the spider and 12 around the ring |
|
Bronze Member Username: Bryanwalsh524Post Number: 70 Registered: Sep-04 | my gain was always down on my amp and my box is ported and tuned to what cerwin vega reccomended. and kevin... will reconing it fix the problem? |
|
Silver Member Username: KravenbloodThat one, Ohio Post Number: 453 Registered: Aug-05 | im assuming it will if it keeps burning and smoking something is wrong in your set up too high of power.. clipping.. etc what amp you running to it the recone should work buy 2 or 3 for future mistakes |