You should convert to PUFF_LZMA boot and then install LZMA Bin 207
Essential kit 103 for conversion to 103 LZMA boot Kit. This is the new change recommended. Convert to PUFF_LZMA. There will not be any more PUFF PUFF_LZMA_207 BIN in separate file
PUFF_LZMA link Alternative PUFF_LZMA link
Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
Hi Nalin, I have been following your instructions silently since long to program my converted Pansat 2500, and at present am using puff LZMA. Now I have another clone PANSAT 2700A. I got it from my friend. On the screen it shows: API-75-227-EUbx Boot Ver:75 Dec 7 2007
Can you tell me please how to continue from there on in order to watch whatever is available at present. I guess I cannot load PUFF files to a CLONE Pansat 2700a. Please help me where can I get loader and latest available clonesafe file.
I appreciate your continued helps over the forum, and thank you in advance.
You need just two files one boot 1.0.3 and another PUFF LZMA 207.
Just converted this kind of box to PUFF LZMA in following way:
Connect the receiver with computer and switch on reciver, wait for on or channel number to appear then first open loader .421 and check on boot file a nd select boot 1.0.3 and hit download , it will take just 10 seconds and will reboot and show P.U.F.F. and then will stop at F. then switch off the receiver open loader BL updater and select Bin file PUFF LZMA 207 and keep one hand on receiver and one hand on write file switch on receiver and hit write as soon as P appear
once download complete, receiver will reboot and show on or channel.
This loader should save your channels from getting wiped out when loading the new bin.
Wait until the channel number shows on the front display of the STB before you hit download to save your channels....Enjoy! Attached Files Pansat-C 2700 Loader v1.0.zip (140.4 KB, 82 views)
CloneSafe-B75-207-TiVo-femu for clones and originals not for converted 2500 to 2700 Attached Files CloneSafe-B75-207-TiVo-femu.zip (568.9 KB, 685 views)
Thanks Nalin, I have registered with the Fta and downloded B75-207-TiVO and clone safe loader. I am wondering what 75-301-TiVO file is? Is that the latest file? which file should I load to STB. 207 or 301.
All I unzipped and using the above mentioned loader, I tried to download the factory file at Sr. #2 above. The file type I selected was BIN File. It did not load rather it just showed me zero progress in the prgress bar. I closed the loader, treid with file at Sr.#3, all I get on the Downloading... bar it showed zero progress. Any help. Sorry I was out and just came back. I tried with another loader:
2700 CloneSafe Loader STB Updater Application
but no response. When I select CloneSafe-B75-207-TiVo-femu with this loader, it says : Error: Check file 2700a
My friend told me that this is clone set. Does orginal also use TiVo files. The file already loaded is "CloneSafe API-75-2.27-EubxBoot ver.75