Plymouth i got the two sat. 110W & 119W everything good signal & quality.You think there is a chance to get the 118W,The LNB im using for 119W is Digiwave`s name dual output.And how can i add sat in my receiver Ive VS ultra 2000,coz i never see any sat 118W pls.help guys thanks
Lumis Load te new factory bin and the satellite info on viewsatusa.com and load the latest bin file at ftahq.com and you will able to see Anik F3 119.7W in your antenna setup.
1. Any Digiwave LNB won't do - you must have Digiwave DGL1189s. 2. This LNB has two outputs - both are good for 118 and 119, i.e. you can connect two receivers. 3. If you receiver does not have a ANIK 3 slate, use any other slate, e.g. Anik 1 4. Scan 118 with the same DiseqC setting as 119, but use LNB freq 10750, 10600 or less. You may need to use LNB type - Standard or Universal 2. 5. Do a Blind Scan of 118 beofore scanning 119.
Dish 500 A two slot 18" x 20" DBS dish designed to pick up 110W and 119W simultaneously. However it can be used to pick up 119W and 129W or just one satellite location like 61.5W or 148W. Plus Dish 500+/1000+ Same as the Dish 1000 in function but about 5" larger and can pick up the 118.75W FSS location. As a 500+ it picks up 110W, 118.75W and 119W. Adding an LNB for 129W makes it a 1000+.
As you can see from the above description, the dish 500 is not large enough.
Plymouth after i load the fac. bin,sat.info. on viewusa then latest file. Do i need to scan each sat?
Second what is the good LNB that i can use to get sat. 118.7W? Can you give me the description for the special LNB for 119w & 118.7w.So in this case i can`t use my exixting LNB on my 119W?PLs help thanks
