2. Unscrew Ariza top cover, there will be a JTAG connection beside the LED Display. Pull up the two tabs holding the front cover on and pull forward
3. Unplug the White IR remote reciever plug attached to the mainboard there is a lock that locks it to the connector you must press on the side towards the front **Do not force the plug, it will come out easy**
4. Plug in JTAG cable, PIN number one is on the LED Display side **Very important!**
5. Unrar Ariza_convert_Pansat2700a.rar
6. Open Ariza_convert_Pansat2700a folder then Jtag 700 Conversion folder
7. switch power on from back
8. Open Wall.exe in Jtag 700 Conversion folder, If you get an error "Could not acquire I/O Windows NT/2K users must have administrative rights" Then Right click on wall.exe go to properties, compatibility tab, compatibility mode, click box"Run the program in compatibility mode for:" then select Windows 98/Windows Me click apply and open wall.exe again
9. Click Refresh Items in wall.exe program
10. Leave wall.exe running
11. In Ariza_convert_Pansat2700a folder, open Jtag 700 Conversion folder open unlock.exe
12. In unlock.exe click file>preferences. In preferences window, JTAG Interface needs to be Parallel port, Parallel Port settings 0x378. Click OK
13. In unlock.exe click IRD Model pull down menu and select STi55xx_2M. If options are greyed out and JTAG Info, Device ID =0x00000000 Device = Unknown device, then check your JTAG Connection. Check that power is ON and JTAG Cable is correct.
14. Click Flash Programming, A window will pop up ignore the instructions, just click ok.
15. In the window "Flash Programming" Set IRD/Flash Selection, IRD Model = STi55xx_2M, Flash = Flash Dump (Full), Set Chip/Sector Programming = Full
Click Unlock, a window will ask you want to "Erase whole flash?" Click ok. Click on Unlock and erase whole flash 3 times.
16. Leave unlock.exe running
17. In Jtag 700 Conversion folder, open Jkeys folder, In Jkeys folder open jkeys.exe
18. In the jkeys.exe click file>preferences. In preferences window, JTAG Interface needs to be Parallel port, Parallel Port settings 0x378. Click OK
19. In jkeys.exe Set IRD Info, IRD Model = STi55xx_2M Set Save Memory, Region = Flash Dump (Full) Click on Flash Programming, A window will pop up ignore the instructions, just click ok.
20. In the window "Flash Programming" **jkeys.exe** Set IRD/Flash Selection, IRD Model = STi55xx_2M, Flash = Flash Dump (Full), Set Chip/Sector Programming = Full Click Erase, a window will ask you want to "Erase whole flash?" Click ok. Click on Erase and erase whole flash 3 times.
21. Click program under Chip/Sector Programming **NOT UNDER SINGLE LOCATION PROGRAMMING** A window will pop up "Program at address 0x7FE00000, size 0x200000 Click Yes, then select file "VorteX 2700 Factory Flash.bin" located in the jkeys folder. Click Open, It should take 3 Mins to Program the "VorteX 2700 Factory Flash.bin" When done Click OK
22. Turn power off at the back of Ariza Unhook JTAG cable Plug in Serial Null modem cable Turn power on at back close jkeys.exe, Unlock.exe, Wall.exe
23. In Ariza_convert_Pansat2700a folder open "GTRom Loader v27.02.exe" Under tools click BIN File, open "2700.bin" and click Download when download is complete under Tools Click BIN File, open"b75_m.bin" in Ariza_convert_Pansat2700a folder, and click Download When download is complete close "GTRom Loader v27.02.exe" Turn power off at back
24. In Ariza_convert_Pansat2700a folder open "Blacklist STB UPDATER 1.3.exe"
Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_209_pwT.bin" put the mouse cursor over Fix! turn power on at back wait untill you see the 8 going accross the front LED Display then click "Fix!" within 2 seconds of the first 8 Wait for download to complete then turn off power at back
Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_211_pwTd.bin" put the mouse cursor over Fix! turn power on at back wait untill you see the 8 going accross the front LED Display then click "Fix!" within 2 seconds of the first 8 Wait for download to complete then turn off power at back
Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_217_pTd_GC.bin" put the mouse cursor over Fix! turn power on at back wait untill you see the 8 going accross the front LED Display then click "Fix!" within 2 seconds of the first 8 Wait for download to complete then turn off power at back
Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_Ukr_220.bin" put the mouse cursor over Fix! turn power on at back wait untill you see the 8 going accross the front LED Display then click "Fix!" within 2 seconds of the first 8 Wait for download to complete then turn off power at back
25. Unhook everything, plug the IR Remote connection back in Put the front cover back on **note the hook on the bottem of front cover** plug everything into your TV and set up system Do blind scans of sats. You will notice is that your display shows 8's on it dont worry about it
Thanks a bunch. I'm fairly new to this (learning more and more) and i was just wondering what a JTAG was? I'm planning to make a trip down to my local computer store and buying one, but thought i'd consult you before doing so.
yes U need to open up the receiver...and locals store will prolly not sell a Jtag cable...ya need to make one yourelf or find a site online that sells em...google is your friend..
This is NOT a task for a newbie...or weak of heart..many experienced cannot do this..if ya like electronics and playing and don't mind maybe killing your receiver, go for it!...otherwise, buy an inexpensive conaxsat mini..
yes U need to open up the receiver...and locals store will prolly not sell a Jtag cable...ya need to make one yourelf or find a site online that sells em...google is your friend..
This is NOT a task for a newbie...or weak of heart..many experienced cannot do this..if ya like electronics and playing and don't mind maybe killing your receiver, go for it!...otherwise, buy an inexpensive conaxsat mini.. --------------------
I don't mind playing with the receiver. Ariza is a dead receiver as it is.
I have some pretty neat computer stores in my vicinity, so i'll ask them for one.
I'm just not sure where to insert it once i open the receiver. Once i do that, should be very easy.
The instructions on the pdf. file were very straight forward once you got the jtag right.
I suggest you use the sites and links I gave ya where you can discuss with MANY people, any questions or problems that U may incurr..they have a discussion area just for this conversion..