My friend has a VS Ultra : LNb Type: Standard LNB Freq: 11250 22KHz : Off And it's the 500 di*h 2 Lnb (110& 119) & 1 Lnb (61.5) So when he is trying to setup the Antenna for the different satellites (119, 61.5 & 110) the only thing that shows is the 110 signal on all sat's. he tried to connect only 119 & 61.5 to the switch and both sats show up with no problems , but when 110 is connected that's when all sat's shows 110. Another way we've tried turn off the 110 LNB then 119& 61.5 are visible. Please advice & thanks guys
he actually ordered a new switch still same issue. on the 110 wire there is a ground wire attached to it ,but the ground wire is not connected to anything.
i have the same problem my 110 dish gives 99-100% quality , but 119 dish gives me 0 % , when it does give 30-40% it's 110 coming up , i changed the switch and still nothing , any idea i have a sonicview 4000
Post Number: 68 Registered: Apr-06 Posted on Sunday, August 31, 2008 - 02:39 pm: ""
-------------------------------------------------------------------------------- i have the same problem my 110 dish gives 99-100% quality , but 119 dish gives me 0 % , when it does give 30-40% it's 110 coming up , i changed the switch and still nothing , any idea i have a sonicview
menu anteena setting, change ur lnb to 12256 etc..
Sada and everybody Tp freq is only there for display if you are on good satellites and do nothing on scan, if the setting is good you can scan. Just info to help you.
Scan ur sat fresh puff without 110 connected. MAke sure u have right DISEQC switch for all lnb. once u scan everything then connect 110 and scan that. try it and it shud b all fine. try it and reply.
