ViewsatP--No Quality on 61.5 !

Leo Bronze Member Username: Leo_here Post Number: 66 Registered: May-06	Posted on Tuesday, May 06, 2008 - 00:23 GMT Can somebody please advice me on this one? Since last bin I have lost quality on my VSP. Has there been any changes in TPs? Do I need a new satinfo.sat file? Where should I get it from?
sada Gold Member Username: Saqeeb9000 Post Number: 3280 Registered: Oct-07	Posted on Tuesday, May 06, 2008 - 00:27 GMT is ur dish moved or something? check ur connection??
dantetn Gold Member Username: Donnie1973 Post Number: 2979 Registered: May-06	Posted on Tuesday, May 06, 2008 - 00:29 GMT if u unplugged it to program, make sure u connected it back up right
Leo Bronze Member Username: Leo_here Post Number: 67 Registered: May-06	Posted on Tuesday, May 06, 2008 - 00:34 GMT My dish has not moved at all. I checked my connections..I am getting 584, 585 but nothing from 611 to 623. My box is not even scanning any channel on 61.5...I tried my hooking up my CS and scanned...i got all the channels with good quality (No use still as CS is down at the moment but it givess a hint that my dish is ok )
dantetn Gold Member Username: Donnie1973 Post Number: 2980 Registered: May-06	Posted on Tuesday, May 06, 2008 - 00:37 GMT it could affect the quality. (ecm) maybe someone else with a cs and 61 will read and share what they are or are not getting
Leo Bronze Member Username: Leo_here Post Number: 68 Registered: May-06	Posted on Tuesday, May 06, 2008 - 00:55 GMT One of my frind has the same receiver. He has not come across any such issues so far. Where can I find the TP info to add channels manually?
dantetn Gold Member Username: Donnie1973 Post Number: 2981 Registered: May-06	Posted on Tuesday, May 06, 2008 - 00:58 GMT lyngsat.c0m
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2191 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 01:29 GMT Leo if you use port 1 change it for 3 or 4 Old problem with port on viewsat
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2193 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 01:29 GMT Leo if you use port 1 change it for 3 or 4 on LNB and switch Old problem with port on viewsat
Leo Bronze Member Username: Leo_here Post Number: 69 Registered: May-06	Posted on Tuesday, May 06, 2008 - 01:38 GMT I tried connecting it directly to only one dish...still no use ! Thanks everyone for prompt replies friends!
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2196 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 01:44 GMT OUPSS
dantetn Gold Member Username: Donnie1973 Post Number: 2984 Registered: May-06	Posted on Tuesday, May 06, 2008 - 01:54 GMT oh, i read where u hooked up a CS to test, thought u had a CS. I dint read it carefully i guess. Yeah, try a new bin lie ply said. It should be working fine.
Leo Bronze Member Username: Leo_here Post Number: 70 Registered: May-06	Posted on Tuesday, May 06, 2008 - 02:00 GMT Ply, if possible, please post the link for Viewsat Platinum's latest file. I believe it should be DBPSW080504. The path you gave is giving os for Pansat X-87BL_080416_B75_263_api
dantetn Gold Member Username: Donnie1973 Post Number: 2987 Registered: May-06	Posted on Tuesday, May 06, 2008 - 02:05 GMT u can get it at ftaforall.net on the homepage
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2200 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 02:06 GMT OUPSS
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2202 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 02:06 GMT I'm sure this one is good
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2203 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 02:07 GMT I' m sure this one is good
African Gold Member Username: Kirankumar NO Bashing Post Number: 2736 Registered: Oct-07	Posted on Tuesday, May 06, 2008 - 02:08 GMT ~~http://www.ftabins.net/showthread.php?t=38022~~
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2204 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 02:10 GMT This one are out before ftabins but fta bins is good site
Leo Bronze Member Username: Leo_here Post Number: 72 Registered: May-06	Posted on Tuesday, May 06, 2008 - 02:11 GMT Thanks Ply....Lets hope this works !
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2205 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 02:11 GMT African what is your username on ftabins
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2206 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 02:12 GMT Leo your box work now?
Leo Bronze Member Username: Leo_here Post Number: 75 Registered: May-06	Posted on Tuesday, May 06, 2008 - 03:46 GMT Still not working man ! This sucks !
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2218 Registered: Jan-08	Posted on Tuesday, May 06, 2008 - 04:09 GMT You can do a fatory default do a hard reboot and reload bin dont load factory bin good luck
dantetn Gold Member Username: Donnie1973 Post Number: 2993 Registered: May-06	Posted on Tuesday, May 06, 2008 - 12:10 GMT make sure ur antenna settings havent changed. look over everything,99% of the time there is nothing wrong with the box.
Leo Bronze Member Username: Leo_here Post Number: 78 Registered: May-06	Posted on Thursday, May 08, 2008 - 00:47 GMT My antenna settings are Satellite: Echostar3 61.5 LNB Power: On LNB Type: Standard LNB Freq: 11250 22KHz: Off TP Freq: 12224 DiseqC 1.0: Port 2 Motor: Off Legacy SW: None I tried changing TP Freq I tried changing the ports I tried adding the channels manually. But it's still not scanning channels from 611 - 622
Leo Bronze Member Username: Leo_here Post Number: 82 Registered: May-06	Posted on Thursday, May 08, 2008 - 02:10 GMT Latest Bin installed as well !
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2269 Registered: Jan-08	Posted on Thursday, May 08, 2008 - 11:04 GMT Leo try it: Try it exactly as write All viewsat box Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote "NEW" do same thing with all provider on Bev provider 09 07 00 09 06 00 09 05 00 09 01 00 08 01 00 no need to delete keys and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Thats erase bad data in the box For box who autoroll and lost channels I hope that work Good luck Thanks Reply if it work Please
Leo Bronze Member Username: Leo_here Post Number: 83 Registered: May-06	Posted on Friday, May 09, 2008 - 21:49 GMT I tried it Plymouth.. Still no luck...its scanning only 14 channels like before
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2306 Registered: Jan-08	Posted on Friday, May 09, 2008 - 22:59 GMT Leo where you live Province or state?
Leo Bronze Member Username: Leo_here Post Number: 84 Registered: May-06	Posted on Sunday, May 11, 2008 - 15:33 GMT Ply I live in Brampton, ON
Semore Butts Silver Member Username: Luser Post Number: 298 Registered: Nov-07	Posted on Sunday, May 11, 2008 - 15:38 GMT many channels have recently been removed from 61.5. Ck lyngsat under packages then click dishnetwork for all current channels
Nalin Nyda Platinum Member Username: Nydas Post Number: 10625 Registered: Jun-06	Posted on Sunday, May 11, 2008 - 15:42 GMT My friend just did a blind scan on 61.5W . He lives just west of Brampton. He got 9 transponders instead of 13 and channel count is down from over 140 to about 104. All the Indian and Arabic channels are OK. The missing TPs, I am told, might be Mpeg-4
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2335 Registered: Jan-08	Posted on Sunday, May 11, 2008 - 20:18 GMT Nalin is right some tp are changed, just to do a blind scan, that recover new Tp
Leo Bronze Member Username: Leo_here Post Number: 85 Registered: May-06	Posted on Wednesday, May 14, 2008 - 02:22 GMT I added the specified TPs as per lyngsat.. NO USE ! I blind scanned all TPs individually..No USE!!! My CS, PSconverted to PUFF and SV are scanning all 13 TPs with over 140 channels!!! Thats it for my VS I guess

« Previous Thread Next Thread »

ViewsatP--No Quality on 61.5 !

Main Forums

Forum Help

Follow Us