I am having trouble adding Bev 82 and 91 together on Dish 500. I can only point to either 82 or 91. I tried putting together but didn't get single and doing separate I was able to get signal. I am using Dish pro LNB (dual). What am i doing wrong. Dish pro Lnb has 2 lnb and currently I am getting single for 82 but no luck getting 91. Any help would be appreciated. By the way I am in So.Cal .
rick here is what you need to do go to www.dishpointer.com put your address in and on the second line scroll down to 82/91 and hit go now you will see the skew and elevation adjust the skew and then mount dish adjust elevation and point dish get 91 set up first( this should be mounted on the right if you are facing the dish) now dishpointer gives you direction to point.go ahead and do that now check for quality if it is not good adjust the elevation first until you get quality and then fine tune if needed by tweaking dish good luck