Big 3 upgrade

Benjamin Lukas Kennedy Silver Member Username: Deadrabit Post Number: 352 Registered: Jun-07	Posted on Tuesday, April 22, 2008 - 04:27 GMT i found the wire to the alt to the battery. but the wire from the battery to the ground and the ground to the chasy seem to be like one wire it goes from the ground on the battery to the chaise and has a soldered place that grounds it like half way to the wire. is this right? its a vw golf 2000 if that helps any one
M.S. Gold Member Username: Nd4spd18 Northwest PA Post Number: 7424 Registered: Jul-06	Posted on Tuesday, April 22, 2008 - 18:47 GMT So? You don't have to run the new wires to the same place as the stock ones. In fact I never do.
Benjamin Lukas Kennedy Silver Member Username: Deadrabit Post Number: 353 Registered: Jun-07	Posted on Tuesday, April 22, 2008 - 20:38 GMT i already got it. thanks!
IcePick Silver Member Username: Clouduz Post Number: 338 Registered: Jun-06	Posted on Tuesday, April 22, 2008 - 22:50 GMT sorry to hijack the thread, but for engine ground can i just pick a screw and ground it?
kklagge Silver Member Username: Kklagge San Diego Post Number: 542 Registered: Dec-04	Posted on Tuesday, April 22, 2008 - 22:51 GMT I would use a bolt on the frame...the ground is the most important part...you're going to the effort so do it right the 1st time.
IcePick Silver Member Username: Clouduz Post Number: 339 Registered: Jun-06	Posted on Tuesday, April 22, 2008 - 23:01 GMT lol well i meant bolt but ok thnx so basically any bolt will work got it
kklagge Silver Member Username: Kklagge San Diego Post Number: 543 Registered: Dec-04	Posted on Tuesday, April 22, 2008 - 23:05 GMT a bolt on THE FRAME...not just a bolt on a flimsy piece of wheel well or something is your best bet.
Benjamin Lukas Kennedy Silver Member Username: Deadrabit Post Number: 355 Registered: Jun-07	Posted on Wednesday, April 23, 2008 - 03:50 GMT my car doesn't have a frame

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us