Bronze Member
Username: Masterstylz Post Number: 39 Registered: Feb-06
Posted on
Sunday, March 30, 2008 - 05:51 GMT VS2000 Lite Ok I got the new bin from totalfta. I tried to update the receiver using Loader2. It wouldn't update after several tries. it currently has the march 5th bin. after turning on, it should start updating but instead i get Loader Error window. What can i do to update the receiver?
Silver Member
Username: Madflea168 Post Number: 385 Registered: Jan-08
Posted on
Sunday, March 30, 2008 - 07:20 GMT go try other sites and download the bins again. many people here do not trust that site anymore. good luck.
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1375 Registered: Jan-08
Posted on
Sunday, March 30, 2008 - 12:20 GMT Lord go to viewsatusa.com/support for Loader and factory bin
Bronze Member
Username: Masterstylz Post Number: 40 Registered: Feb-06
Posted on
Sunday, March 30, 2008 - 14:20 GMT I got the loader and factory bin for viewsatusa.com. But still get the same error message, "Error Updating."
Platinum Member
Username: Lklives Post Number: 14985 Registered: Jan-06
Posted on
Sunday, March 30, 2008 - 14:58 GMT Check cable and connections...possibly reverse the cable..and provide more detailed info u really expect detailed responses.. how to use the receiver... [link removed]
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1385 Registered: Jan-08
Posted on
Sunday, March 30, 2008 - 15:01 GMT Ritalin time I think LK is a little bit agited this morning Ritalin or Prosac MMMMMHHH!
Bronze Member
Username: Masterstylz Post Number: 41 Registered: Feb-06
Posted on
Monday, March 31, 2008 - 02:43 GMT Details? ok... I have a Viewsat Plat Lite (VS2000) Any suggestions?
Bronze Member
Username: Masterstylz Post Number: 42 Registered: Feb-06
Posted on
Monday, March 31, 2008 - 02:45 GMT Oh and yes I did power off and on the receiver between picture 4 and 5.
Silver Member
Username: Luser Post Number: 170 Registered: Nov-07
Posted on
Monday, March 31, 2008 - 03:38 GMT Have you used this cable before? It must be a null modem cable.
Platinum Member
Username: Lklives Post Number: 15002 Registered: Jan-06
Posted on
Monday, March 31, 2008 - 03:44 GMT SENDING ZRQINIT message error...that was the missing link in your previous posts.. U have a communication problem between your receiver and computer...either bad/wrong cable or comport...check connections, try reerse cable...make sure its the right cable that came with the receiver..don't use USB ports unless u have an adapter and drivers...try all comports...check baud rate...etc.. U can also google that error message for additional hints to try..
Gold Member
Username: Plymouth Quebec city,
Quebec
Canada
Post Number: 1400 Registered: Jan-08
Posted on
Monday, March 31, 2008 - 12:33 GMT Lord keep your receiver off (rear switch) Check in tool and choose Port Com1 before Click PC to STB and Switch on receiver Take the Loader and Factory bin to viewsatusa.com for your box Good luck
Bronze Member
Username: Nqarni Post Number: 31 Registered: Feb-08
Posted on
Monday, March 31, 2008 - 15:42 GMT I had the same prob couple of mths ago. I was using Serial cable. Must use Null cable. they both look same.