hi all here is what's going on after playing so much for single i get S27 Q 61 some on EchoStar 7 which is 119 i get 153 TV & Ra. 0. all of them it say on the bottom of the screen 8/10 EchoStar so i Guss it from 110 not 119. After i Rescan all 3 Sat. i get EchoStar 3 TV 134 RD 26 Total 160 EchoStar 7 TV 153 RD 00 Total 153 EchoStar 8 Total 00 is this normal here all my setting
STB (Brand/Model) -->: VS lite 2000
Dish (Size? Motor? # of LNB's) -->: i have 2 dish 500 one only single for 61.5 and it's working fine and 2nd has double LNB it say on it Dish pro with only 1 jack on each side don't have motor
Switch used? (Type?, Brand?, Inside/Outside? -->: 4 in 1 switch it's out side the balcony it's new it came with the receiver
Sat (Name/#) -->: Echo 3 61.5 LNB Power -->: on Lnb Type -->: Stander Lnb Freq (Hi/Lo)-->: 11250 22khz -->: off TP Freq. -->: 12224 Search Opt. -->: don't have this option Diseqc -->: port 3 Motor -->: no Legacy SW -->: none
Sat (Name/#) -->: Echo 7 119 LNB Power -->: on Lnb Type -->: Stander Lnb Freq (Hi/Lo)-->: 12250 22khz -->: off TP Freq. -->: 12224 Search Opt. -->: don't have this option Diseqc -->: port 1 Motor -->: no Legacy SW -->: none
Sat (Name/#) -->: Echo 8/10 110 LNB Power -->: on Lnb Type -->: OCS-DP Lnb Freq (Hi/Lo)-->: 12250 22khz -->: off TP Freq. -->:12239 Search Opt. -->: don't have this option Diseqc -->: port 2 Motor -->: no Legacy SW -->: none
Which Loader are you using? -->: loder2.2
Which bin is on the receiver? -->: 08-03-05
What is the specific problem? -->: that i can't get any CH. from 119 & not all 110
please help me to get to work before i gave up thank you
vslite........... just do a blind scan. if this option is available for your rec.. so i guess u are getting quality on each sat .. in this case do a blind scan .. but delete all channels first and then do a blind scan...u will get all the channels back..
i did that but when i scan 119 i get like 400 tv channels but not of them is working either is say auto roll processing or no no audio no video . when i go to antenna setup and press F1 for auto Diseqc on 119 it read on the top right corner Echo8/10. i notes today that when i F1 for auto Diseqc on 110 the port sittings go to port 1
You must run 2 wires from DP twin. Just check'n and alighnment could be off if only getting one sat. When in antenna setting upon good signal sat being received will display and should match that listed obove options.
