|
Bronze Member Username: Anairis07Post Number: 13 Registered: Jun-06 | i have a new cw 600s i load the last bin and still with no signal. do i need to load another program or bin or something else because i don't know if im doing something wrong. |
|
Gold Member Username: NydasPost Number: 9510 Registered: Jun-06 | There is a new ECM on DN channels - mostly on the internationals. Bruce 1 is a very good helper for CWs and he might come along and throw some more light. |
|
Gold Member Username: BrucesterPost Number: 1378 Registered: Jul-06 | CaptiveWorks 600S Guide Created by Mrokarvi Credit goes to Mr.CaptiveWorks and all others who posted information on the web; I just put together in this little guide to help newbies. Also available in pdf in downloads section CW600s Guide ====================== 1.How to update s/w by PC? ====================== 1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5) or You can buy a null modem cable available at most electronic stores. 2) Connect your PC and receiver with twisted RS-232C Null modem cable. 3) Turn on the receiver you will see 00:00 and then press "POWER" key on front of the receiver panel to make it standby, the LED dot - - : - - will blink. Note: Loader will not work until you see - - : - - on LED panel 4) Run the LoaderV1.02/LoaderV1.04 on your PC. Select the right COM port where you connected your null modem cable usually COM1, then select <download>,press <open> and select the bin file, then click <start>, upgrade will begin. 5) After finishing, the LED will display "-End" ====================== 2.How to Enable Patch or Disable Patch? ====================== Exit all menu, Press F1 key, the LED will display 'H', then press '000' ====================== 3.How to Edit Patch key? ====================== After Enable patch key, go to Main Menu-->Installation-->Patch Menu ====================== 4.How to Select EPG style? ====================== From main menu >system setting->system->EPG style can change Normal: Viewsat/C00lsat/Pansat style Scroll Txt: Old Captivework style ======================== 5.How to configrure the SID sort? ======================== From main menu->system setting->system->channel No. style can change: Normal: Normal sort order SID sort: Dish order =============================== 6.How to Category Search? (Available only in V1.41) =============================== 1) Make sure the epg is loaded- to do that just open the epg screen and see if the boxes are full, if not go choose any box that has no epg and wait 15-20 sec and it will be filled. ( you only need to do this once in the beggining). 2) Then exit and hit F2 on your remote. 3) Category box will open, just choose what category you want to watch and hit ok 4) After 2-3 seconds, a list of channels will open which are CURRENTLY playing these categories (every half hour this list changes when a new show is finished or started) 5) Next to the channel there is the title of the show, if you hit INFO button it will open the full information, hit INFO again and it will disappear. Just select what you like and watch. =============================== 7.How to Blind scan? (Available only in V1.42) =============================== BLIND SCAN function can be accessed by going to From main menu-> Installation -> selecting the satellite that you want blind scan and press F1 key on your remote. ========================= 8.How to Clone CW600s Box to Box? ========================= From DigitalPlus: 1) Connect the master and slave box with twist RS232 null modem cable (pin2 to pin3, pin3 to pin2, pin5 to pin5). 2) Start the master receiver and press "POWER" key to make it standby "- - : - -". 3) Start the slave receiver, in the master box the led will display 'H' and blink it. 4) Input the password: 111 ---- Transfer S/W 222 ---- Transfer data 333 ---- Transfer data, then S/W 444 ---- Copy whole flash except Boot Loader. 5) After finishing inputting the password. Transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable, start your receiver. Note: By the different password, you can do what ever you want to do for Box to Box. ============================ 9.How to set DishPro LNBs? (Available only in V1.43) =========================== DishPro LNB settings can be accessed by going to Main Manu-> Installation-> Antenna Setting-> 5th Option LNB type =============================== 10.How to Set Legacy SW21/42/44/ Switch? (Available only in V1.43) =============================== Legacy Switches settings can be accessed by going to Main Manu-> Installation-> Antenna Settings->4th Option Legacy SW Set the type of switch you got on your dish setup. Don't forget to set DISCQ setting to none otherwise it will not work properly. =============================== 11.How to set channel lock on certain channels? =============================== Channels can be locked by going to Main Manu->Channels Manager->channels Edit ->go to that specific channel you want to put lock on and press blue key on your remote. |
|
Gold Member Username: BrucesterPost Number: 1379 Registered: Jul-06 | and the new bin for that box is Cw600s V1.72_2008_03_24 -------------------------------------------------------------------------------- CW600S V1.72_2008_03_24 Fix Frezzing in 97.0W if your box got primium on it then your box is not cw600s there is a nother box that is cw600p just mack sure you got the right bin for your box then dont forget to enable the patch f1 000 on the remote you will see on tv screen patch inable then let roll |
|
Bronze Member Username: Anairis07Post Number: 14 Registered: Jun-06 | wich satellites i choose 110 & 119 |
|
Silver Member Username: Jwl1Post Number: 251 Registered: May-06 | Ana--yes, both. |
|
Bronze Member Username: Anairis07Post Number: 20 Registered: Jun-06 | how can i deleted all the channels and scan againg. because there duplicated i can see one but the other no. |
|
Silver Member Username: Jwl1Post Number: 256 Registered: May-06 | Press menu on the remote Press Ok on "installation" Scroll down to "Factory Default" Click okay Select all channels Then you will rescan the desired sats, (select all for the option in regard to the scan) just as you did before, one at a time. |
|
Gold Member Username: BrucesterPost Number: 1387 Registered: Jul-06 | then enabble the patch f1 000 and let roll |
|
Bronze Member Username: WineskmPost Number: 20 Registered: Oct-06 | What is the latest bin for a CW700s? I have a USB where can I download it? KmW |
|
Silver Member Username: Jwl1Post Number: 257 Registered: May-06 | KMW--at crazyfta (.com) |
|
Bronze Member Username: WineskmPost Number: 21 Registered: Oct-06 | I can't get that site to come up? KmW |
|
Silver Member Username: DimwittPost Number: 525 Registered: Aug-06 | www.tvkeyz.com/filez.html |
|
Gold Member Username: BrucesterPost Number: 1391 Registered: Jul-06 | http://s3.excoboard.com/exco/index.php?boardid=7267try this link KmW |
|
Gold Member Username: BrucesterPost Number: 1392 Registered: Jul-06 | http://s3.excoboard.com/exco/index.php?boardid=7267 try this link KmW |