"Subdirectory - PUFF_LZMA_258_Serial_Bins\ALL BOOT BINS FILE PUFF to LZMA D1. With the receiver ON and showing ON or channel number, D2. Start the Puff_BG_BOOT Loader Converter.exe D3. Click on Boot only. D4. Load one of the BOOT BINs (64K files) of different Backgrounds of your choice. D5. After Load is completed, if will show PUFF_PUFF Night Rider.
E. Loading latest PUFF-LZMA BIN. This is the part to be repeated in future with newer PUFF_LZMA BINs. You will always use PUFF_LZMA BINs clearly labeled PUFF_LZMA OR LZMA_PUFF or just LZMA. Subdirectory - PUFF_LZMA_258_Serial_Bins E1. In the BL update 1.4, select the latest 258 PUFF_LZMA BIN and select BIN in the loader. Keep right hand on mouse ready to write. The selected BIN must be LZMA compression. E2. Turn on receiver at the back using left hand and as soon as you see P (of PUFF) scrolling, click on Write with right hand. E3 Again wait for BURN to take place and then the receiver will reboot, go through the P-U-F-F cycle twice and stop on (F) for one minute or so. E4. Wait till it boots up to ON position. and shows channel number."
hi guys i did all this but the receiver does not turn on or channel number just keep runnig P U F F twice and stop on F for few seconds and go back again to P U F F twice again and so on , plz how can fix this . thnx
thnx Nalin for ur help, i tried recover and all that nothing happen same thing some shows only P U F F twice and get stuck on F for a few seconds and back again to P U F F twice and stuck again on F and so on my question is can i return it back to 2500a and start over ? thnx
sam tab. let me explain, use the file 258 and the loader( nalyn Post the link) but not the boot 1.0.1 this boot will be use for new stuffs.
USE THE TIMING METHOD TO LOAD THE BIN.
USE Bl loader 1.4 .................. Reboot Box-When P or B or---- rolls hit the write button then reload boot and file that your stb have or you want.