|
New member Username: Guntha3Post Number: 1 Registered: Mar-08 | I have 2 12w6v2s at 2 ohm hooked up to a JBL GTO1201.1II amp (2ohm). What should i put my bass boost, gain, and lpf for maximum bump? |
|
Silver Member Username: DannyboyyO/S Power!!!!, i lo... USA Post Number: 475 Registered: Jun-06 | bass boost all the way down or in other words off, lpf no more than 100hz, i like mine set @ 100 but it depends on what ur speakers are set @. and take a dmm to set ur gain. find a web site that tells you what the output ac voltage of your amp should be. and set it to that using a dmm |
|
Gold Member Username: Van_manBoston South, MA Post Number: 3611 Registered: Mar-06 | so 2 w6's wire down to a 1 ohm load. That amp is not 1 ohm capable. You my friend need a diffrent amp. It may be one ohm stable, but I cant find the specs. |
|
New member Username: Guntha3Post Number: 2 Registered: Mar-08 | thanks dan |
|
Gold Member Username: Van_manBoston South, MA Post Number: 3613 Registered: Mar-06 | http://www.sonicelectronix.com/item_7444_JBL+GTO1201.1II.html Number of Channels 1 - Mono RMS Power (4 ohms) 787 watts x 1 channel RMS Power (2 ohms) 1114 watts x 1 channel RMS Power (1 ohm) Not Stable Bridged RMS Power Not Bridgeable Peak Power Output N/A Minimum Impedance Unbridged 2 ohms Minimum Impedance Bridged Not Bridgeable ohms THD at Rated RMS Power 1% Speaker Level Inputs N/A Preamp Outputs Yes Built-in Crossover Yes - LP High-Pass Crossover Frequency N/A Low-Pass Crossover Frequency 32 - 320 Hz Subsonic Filter N/A Signal-to-Noise Ratio 70 dB Channel Separation N/A Bass Boost 0 - 12 dB Bass/Gain Remote Optional (not included) Fan Cooled N/A Fuse Rating 40 A x 3 12 W6 v2's only come in dual 4 ohms. So if you wire them together, its either 4 ohm, or you can wire them for 1 ohm. So before you go thanking dan for blowing up your amp, maybe you should do some research Gunther http://www.crutchfield.com/learningcenter/car/subwoofers_wiring.html?imageID=2DV C%5F4%2Dohm%5Fmono If it was me, and I had that amp allready, I would wire to 4 ohms.} |
|
Gold Member Username: Denali_on_22sThe kids love my rhyme... Post Number: 4579 Registered: Feb-06 | yeah something smells fishy... |
|
New member Username: Guntha3Post Number: 5 Registered: Mar-08 | Marc, that is how i have them wired. maybe i was misled when someone told me that was two ohm. |