For missing channels and Tps on echostar
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1277 Registered: Dec-06 | I noticed a few weeks back that I have to scan echo1.2 and then echo 6/8 or 8/10 depending on your receiver to get ALL echostar channels and TPS. also make sure the disqe is set for your system properly and you may have to use the arrow key for TP setting to come in right. Maybe this doesn't work for other receivers but it works for CW 600P. Just thought I would share this with you all. I know it sounds strange but echo 1.2 is showing up as ehco 6.8 and a lot of the sats are not showing up right at all EG: nimiq 1 is showing as echo 6.8 etc... Its the TP and disqe setting that you have to change in oder for you to get them all. Move the arrow keys till you get the best signal for TPs and change the NONE on your disqe settings to what ever your set up is set for .... mine is 1 for echostar 6.8 use the same settings for echo 1.2 and you get ALL echo TPs and Channels Like I said this works for me |
|
Silver Member Username: PlymouthQuebec city, Quebec Canada Post Number: 619 Registered: Jan-08 | Doreen i try this on my viesat ultra but the higher signal not good for me. If i made this i lost channel. Who have the present list for sat scan freq tp. Give me please Thanks all |
|
Silver Member Username: MetallicaPost Number: 244 Registered: Jan-08 | Hey Doreen don't tell me that you type all of that..how come i don't see any TYPO.. |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1280 Registered: Dec-06 | PST... whispering>>>>>> i used spell check HEHE |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1281 Registered: Dec-06 | Plymouth .. The TP's are V and H.. some don't have channels in on either meaning NO channel for the freq. setting. To locate all the TP's ... I don't have that info right now but will look into it |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1282 Registered: Dec-06 | http://www.dishchannelchart.com./ great site for all channels and tp settings |
|
Platinum Member Username: LklivesPost Number: 14264 Registered: Jan-06 | Actually for sat and TP frequencies listings and info, use lyngsat.c*om...DN and Bev circular polarity at www.lyngsat.com, the TP's are listed as R-L...and are V-H for all linear LNB polarity and satellites.. The only way to get ALL echostar channels is to have LNB's aimed at each echostar satellite, and keep your TP's up to date and scanned.......DN will commonly simply change channels to other Echostar sats and to other TP frequencies... |
|
Silver Member Username: PlymouthQuebec city, Quebec Canada Post Number: 623 Registered: Jan-08 | I went list for sat setup, like Tp freq and lnb high/low too, Lk i know Lingsat but i dont see this. One guy post it and i dont found. Thanks all |
|
Platinum Member Username: LklivesPost Number: 14269 Registered: Jan-06 | All U need is the satellite, TP and its frequency, and polarity info...keep it simple.. |
|
Silver Member Username: PlymouthQuebec city, Quebec Canada Post Number: 625 Registered: Jan-08 | Sorry i'm comeback. LK That what i need please and i save for futur Thanks |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1287 Registered: Dec-06 | just romove the "/" in lying/sat |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1288 Registered: Dec-06 | remove i meant .. darn typos again OOPS SEES my bad silly me |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics