i have a pansat 2500 converted clone. when i load the channels, echo 7 & 8, "8" just repeats exactly what i have in "7". i did a tp scan, blind scan, i even loaded one bird at a time. any help would be greatly appreciated...
Reinput the correct antenna settings ....corresponding to your hardware configuration with the sats, LNB's, cables, and switch ports..
The receiver has no clue what u did on the roof, thats why U need to tell it, with correct receiver antenna/dish settings..and there is NO standard settings and 1 shoe fits all..U gotta go look on the roof and see whats up there and how its all configured...thats why U ALWAYS WRITE THEM DOWN AND SAVE THEM...unless U like climbing..FTA 101
Upin: did you get Echo 7 and Echo 8.1 - both of them before on your LNB? some LNBs are twin and are often professionally set up for receiveing both 119W and 110W from one LNB. You have to scan 119 using TP freq of 12239 and the 110W using TP freq of 12224. Also the port setting for 119 is 1 and for 110W is 2 or none. Keep 110W disabled and scan 119. The disable 119, enable 110 and scan. then enable the 119. If you have a twin LNB it will work - Oh I forgot to mention that if you have Dishpro you will have to change the LNB type in th eantenna settings to dish pro or to ocs.