3500SD is up and running with BIN 369. All channels on 110, 119, & 61.5 are working fine except for those only on TP 12326 for 110. I have no idea why. Hard boot done. Any suggestion why the channels have "no signal" (0%) for TP 12326 (110). I am puzzled. Same issue anyone? Thnx.
If U are missing channels on 3 TP's, it sounds to me like ya never had them...and the dish isn't aligned correctly...or dish moved..
disconnect switch...and do a default reset and do seperate sat scans...if ya don't get em then, U will know its an alignment issue...otherwise, its a receiver antenna setting issue or bad cable/connection issue
LK - I had them channels 'til Thursday. Last night I noticed they had "no signal". What I don't understand is that other than those three TPs, everything is fine on 110. It is also running great for 119 & 61.5. Which means that there is no alignment issue. I'll delete 110 channels and rescan it to see if I can get them back. Thanks. I'll post results later.
ive had the same trouble on 12443 lost channels after rescan but it probably is just alignment, i used to have to physically adjust for quality before just to get chans after 516 all other tps are like 100 % quality and those are like 65 -74%
zak - I don't think it's the alignment. 110 channels are working just fine other than channels associated with TPs I have mentioned. Other TPs on 110 have level of 85-90%. 119 & 61.5 running great.
I am having the same problem with Transponder 13 on echo 119? Most all transponders are working (90-99%) Quality, but when I go to Transponder 13 I get 0% quality.
LK - I am beginning to think my dish may out of wack (a little). How do I go about checking it? On my DN sub receiver signal seems to be firn. Any suggestions? Thanks.