|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 455 Registered: Jul-07 | ok these are my plans......http://www.subwoofertools.com/forum/ported-box.asp?Ew=35&Eh=20&Dia=9&Xmax=21&Vd= 0.17&NumW=1&Vb=3.5&Fb=35&Qts=&Vas=&Fs=&CE=0 iv got all the wood cut and now im wonderwing if i should have the violet piece ion there??? would it make more of a difference??? juts curious and could i shorten it mabey to me it looks to long in the box........ |
|
Gold Member Username: •cam•BC Canada Post Number: 1631 Registered: Nov-06 | Yes, removing the violet piece will change the tuning drastically. |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 456 Registered: Jul-07 | well what about shortening it?? |
|
Gold Member Username: Van_manBoston South, MA Post Number: 3264 Registered: Mar-06 | Shortening it will make the tuning go up (Boom Box). I would add to it and make the tuning 32 |
|
Gold Member Username: Tatonka-[Team Audib... Post Number: 1316 Registered: Mar-07 | Shortening it will also mess up tuning. Any modifications to the port length or size will take your tuning out of wack. |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 457 Registered: Jul-07 | so if i shorten it it would be at what any ideas???cuz the design now is 35 hz but everyone else i have talked to tunes higer ya know....so would it be okay? |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 458 Registered: Jul-07 | bump |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 459 Registered: Jul-07 | ok so i re measured all the measurements and my 15 will not fit inside the box plans........wtf??? help guys im drowning in confusion....espcially since i already made the cuts and the made all the cuts right soo wtf is worng here???? |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 460 Registered: Jul-07 | heeeeeeeeeeellpppp |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 461 Registered: Jul-07 | help.. |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 463 Registered: Jul-07 | bump!!!! |
|
Platinum Member Username: Rovin4 10 Pioneer... Post Number: 12756 Registered: Jul-05 | y doesnt it fit ? ..... |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 464 Registered: Jul-07 | well i have to cut a 14in hole to mount the sub on it and the violet piece is to long but i cut it to the design exactly...now i have triple checked all the cuts im going insane....keep postin rovin lol |
|
Platinum Member Username: Rovin4 10 Pioneer... Post Number: 12758 Registered: Jul-05 | so the back of the sub is touching the port then ? ... |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 465 Registered: Jul-07 | yesssss u understand thankgod!!! yea violet piece to to long.....if i shorten it 3 in exactly it fits fine....the sub should go where the port stops right in the yellow and red cornorish right??? |
|
Platinum Member Username: Rovin4 10 Pioneer... Post Number: 12760 Registered: Jul-05 | well u can shorten it but tuning will go up but i guess u cant help it since u already cut the wood so just retype a higher tuning on the calculator to see what u get since u may need to retrim a few pieces of wood .....i done it b4 .... |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 466 Registered: Jul-07 | ill only need to trim that one violet piece right? and 3in isent that bad |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 467 Registered: Jul-07 | im so pissed im just trim that violet piece down 3 in and say fug it.....it will still sound decent right? |
|
Platinum Member Username: WingmanaliveA pic is worth 1000 posts!! Post Number: 12356 Registered: Jun-06 | How much does the back of the sub hit the port? Maybe add another baffle or two on the front to pull the sub away from the port? How about inverting the sub? Do you have room for that? |
|
Platinum Member Username: Rovin4 10 Pioneer... Post Number: 12761 Registered: Jul-05 | no dude its not as simple as trimming off a measly 3" ...when u do that it also alters the cuft & tuning of the entire box which may aslo affects its shape but in this case ur lucky since u only need to trim & widen the port a bit http://www.subwoofertools.com/forum/ported-box.asp?Ew=35&Eh=20&Dia=9&Xmax=21&Vd= 0.17&NumW=1&Vb=3.5&Fb=37.5&Qts=&Vas=&Fs=&CE=0 note now the port is 4" wide ...up from 3.75" ...new tuning 37.5hz to give u that needed clearance ..... |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 468 Registered: Jul-07 | okay fixed all the dimensions...thanx a bunch rovin...ill shoot a vid after its all done....but why would subwoofer tools show me a box that had wrong dimenions??? |
|
Silver Member Username: Santa_fe02 Hyundia Santa Fe, 120.3 db not... Post Number: 470 Registered: Jul-07 | okay i think im okay acutally if i mount the sub on the red side wall it fits fine is this how i was suposed to do it originally?? or is this a bad idea???? plzz post guys link to the box is at top!! |
|
Platinum Member Username: WingmanaliveA pic is worth 1000 posts!! Post Number: 12360 Registered: Jun-06 | Yeah I would've assumed the sub to be mounted on the red side anyway. |