Taking the time to

 

Bronze Member
Username: Poopoohed

Post Number: 54
Registered: Jul-06
i thought i'd take this down time to move my dish ..long story short i'm now getting 97% on bird 119 but only 67% on 110 .
played with it most of the day so real answers only plz
 

New member
Username: Jgrumby

Post Number: 1
Registered: Dec-07
Did you try peaking the dish on 110 as opposed to 119?

Also, are you sure there are no obstructions in the line of sight since you moved the dish?
 

Bronze Member
Username: Poopoohed

Post Number: 55
Registered: Jul-06
yea i peaked the 110 by moving the dish but it makes the 119 go offline as far as the field of view is better at this location
 

Bronze Member
Username: Carpie

Post Number: 31
Registered: Dec-07
Try moving your house.
 

Bronze Member
Username: Poopoohed

Post Number: 56
Registered: Jul-06
yea thanx fishman that helps since moving my house i can see into your mommas bedroom window alot better FOOL!
 

Silver Member
Username: Razzorwyre

Post Number: 119
Registered: Dec-07
When I set my dish I used the cals from Dishpointer that combined 110 and 119 and it got it at about 97% on both dishes. This may help instead of lining one at a time.
 

New member
Username: Jgrumby

Post Number: 3
Registered: Dec-07
If you were getting good quality on both sats before you moved the dish, your mounting pole might not be plumb. Make sure your bracket is not slightly tilted in one direction or the other. You also might be able to make up the difference by adjusting the dish skew if it is off a bit.
 

Bronze Member
Username: Poopoohed

Post Number: 57
Registered: Jul-06
ill ttry both sugests thnx raz & grum
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us